[Tue Dec 20 02:11:03 2011] Detection parameters:
  Position = (144.8, 338.2) = 17 16 27.54 -29 8 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.4 +/- 13.8
  Background counts = 28.2
  Rate = 0.009 +/- 0.001

[Tue Dec 20 02:11:03 2011] Off-axis axis estimate = 11.51'
[Tue Dec 20 02:13:41 2011] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 02:13:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 02:13:41 2011] Initial guess for spatial extent in simple fitting = 12.18"
[Tue Dec 20 02:13:41 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.964
[Tue Dec 20 02:13:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.18"
[Tue Dec 20 02:21:37 2011] fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 20 02:21:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 02:21:37 2011] fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 20 02:21:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 02:21:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 02:21:37 2011] fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 20 02:21:37 2011] fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 20 02:21:37 2011] Fit fullrun_pn_xmm0506050301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 20 02:40:13 2011] Spatial fit model total counts = 520.875000, observed total counts = 519.000000
[Tue Dec 20 02:40:13 2011] Offset between fit and detection position for source 1 = 0.542994 pixels
[Tue Dec 20 02:40:13 2011] 517.437900 total counts/ 484.105000 bgd. counts: snr = 1.514967
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.542994 pixels
  Position = (144.9, 338.7) = 17 16 27.50 -29 8 16.7
  Extent = 3.0" x 3.0", rotation angle = 0
  Source counts = 33.3 +/- 22.7
  Background counts = 484.1
  Rate = 0.004 +/- 0.003
  Deleting source due to low Poisson probability