[Mon Mar 26 10:19:28 2012] Detection parameters:
  Position = (283.3, 280.9) = 21 11 32.16 44 48 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1505.8 +/- 46.9
  Background counts = 27.7
  Rate = 0.2 +/- 0.005

[Mon Mar 26 10:19:28 2012] Off-axis axis estimate = 1.68'
[Mon Mar 26 10:46:42 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 10:46:42 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Mar 26 10:46:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Mon Mar 26 10:46:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon Mar 26 10:58:30 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 26 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 10:58:30 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 26 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 10:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 10:58:30 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 26 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Mar 26 10:58:30 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 26 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Mar 26 10:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506050101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 10:58:37 2012] Source 1 is offset by 6.966061 and 5.565578 pixels which is larger than
2 X fitted extent = 0.835549 x 0.835549, not incorporating fit results
[Mon Mar 26 10:58:37 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 10:58:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 10:58:37 2012] Assessing source extent using major
[Mon Mar 26 10:58:37 2012] Source does appear to be extended
[Mon Mar 26 10:58:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 11:17:40 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 11:17:40 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Mar 26 11:17:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Mon Mar 26 11:17:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Mon Mar 26 11:29:56 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 26 11:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 11:29:56 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 26 11:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 11:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 11:29:56 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 26 11:29:56 2012] fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 26 11:29:56 2012] Fit fullrun_mos2_xmm0506050101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 26 11:30:03 2012] Spatial fit model total counts = 1575.400000, observed total counts = 1480.000000
[Mon Mar 26 11:30:03 2012] Offset between fit and detection position for source 1 = 0.073928 pixels
[Mon Mar 26 11:30:03 2012] 1563.310000 total counts/ 605.861000 bgd. counts: snr = 38.898168
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.073928 pixels
  Position = (283.3, 280.8) = 21 11 32.15 44 48 3.4
  Extent = 4.8 (4.5-5.1)", rotation angle = 0
  Source counts = 957.4 +/- 39.5
  Background counts = 605.9
  Rate = 0.1 +/- 0.004
[Mon Mar 26 11:30:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 11:30:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 11:30:03 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 11:30:03 2012] Source does appear to be extended
[Mon Mar 26 11:30:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 12:03:50 2012] XMMSAS src. selection expression = ellipse(24599.336200, 24382.167600, 288.391208, 288.391208, 0.000000, X, Y)
[Mon Mar 26 12:03:50 2012] Writing source region out to fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 26 12:03:50 2012] Extracting stamp from image fullrun_mos2_xmm0506050101_pi300-10000_cl_sm2.00.img.gz, (267, 264) - (300, 297)
[Mon Mar 26 12:03:50 2012] XMMSAS bgd. selection expression = annulus(24599.336200, 24382.167600, 480.652014, 961.304028, X, Y) && !ellipse(23198.584717, 24867.290491, 519.324695, 339.852378, 226.903924, X, Y)
[Mon Mar 26 12:03:50 2012] Writing fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1.gif
[Mon Mar 26 12:03:54 2012] Mean detx,y = (116.23, 87.65) 
[Mon Mar 26 12:03:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 12:04:10 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 12:04:10 2012] Setting source spectrum file to fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 12:04:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 26 12:13:32 2012] Updating aperture counts using extracted products
[Mon Mar 26 12:13:32 2012] Error reading totcts from fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 12:13:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:13:32 2012] Using photon index=1.80, rate=0.102, arf fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 12:13:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:13:32 2012] Updating source flux to 1.4e-12
[Mon Mar 26 12:13:34 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Mar 26 12:13:50 2012] Reading fit data from xmm0506050101/analysis//spectral/fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 26 12:13:50 2012] Spectral fit parameter nH value = 3.83295e+21
[Mon Mar 26 12:13:50 2012] Spectral fit parameter PhoIndex value = 4.12802
[Mon Mar 26 12:13:50 2012] Failed to get F(0.3-8.0) from xmm0506050101/analysis//spectral/fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 12:13:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:13:50 2012] Using Nh = 3.8e+21, photon index=4.13, rate=0.102, arf fullrun_mos2_xmm0506050101_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 12:13:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:13:50 2012] Updating source flux to 9e-13