[Thu Feb 23 23:11:58 2012] Detection parameters:
  Position = (332.8, 217.9) = 2 39 57.37 61 8 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.9 +/- 7.6
  Background counts = 6.2
  Rate = 0.003 +/- 0.0009

[Thu Feb 23 23:11:59 2012] Off-axis axis estimate = 6.35'
[Thu Feb 23 23:49:05 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 23:49:05 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Thu Feb 23 23:49:05 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.023
[Thu Feb 23 23:49:05 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.60"
[Fri Feb 24 00:04:56 2012] fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_src7.ximg exists
[Fri Feb 24 00:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_src7.csv
[Fri Feb 24 00:04:56 2012] fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Feb 24 00:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_src7.csv
[Fri Feb 24 00:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 00:04:56 2012] fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Feb 24 00:04:56 2012] fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Feb 24 00:04:56 2012] Fit fullrun_mos2_xmm0505981401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Feb 24 00:05:06 2012] Spatial fit model total counts = 1819.310000, observed total counts = 1826.000000
[Fri Feb 24 00:05:06 2012] Offset between fit and detection position for source 6 = 0.890936 pixels
[Fri Feb 24 00:05:06 2012] Warning, changing simple spatial fit ID from 7 to 2
[Fri Feb 24 00:05:06 2012] 1946.940000 total counts/ 1946.940000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.890936 pixels
  Position = (333.1, 217.1) = 2 39 57.21 61 8 22.1
  Extent = 2.5 (2.5-36.9)", rotation angle = 0
  Source counts = 0.0 +/- 44.1
  Background counts = 1946.9
  Rate = 1e-16 +/- 0.003
  Deleting source due to low Poisson probability