[Thu Jan  5 21:06:00 2012] Detection parameters:
  Position = (276.6, 290.8) = 2 40 31.72 61 13 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11512.6 +/- 127.6
  Background counts = 6.9
  Rate = 0.9 +/- 0.01

[Thu Jan  5 21:06:00 2012] Off-axis axis estimate = 1.68'
[Thu Jan  5 22:11:00 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 22:11:00 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jan  5 22:11:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Thu Jan  5 22:11:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Jan  5 22:32:08 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan  5 22:32:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 22:32:08 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan  5 22:32:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 22:32:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 22:32:08 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan  5 22:32:08 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan  5 22:32:08 2012] Fit fullrun_mos2_xmm0505981301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan  5 22:32:19 2012] Spatial fit model total counts = 10219.000000, observed total counts = 10205.000000
[Thu Jan  5 22:32:19 2012] Offset between fit and detection position for source 2 = 0.134658 pixels
[Thu Jan  5 22:32:19 2012] 10248.790000 total counts/ 2238.190000 bgd. counts: snr = 169.323240
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.134658 pixels
  Position = (276.6, 290.6) = 2 40 31.74 61 13 44.9
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8010.6 +/- 101.2
  Background counts = 2238.2
  Rate = 0.6 +/- 0.008
[Thu Jan  5 22:32:19 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 22:32:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 22:32:19 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 22:32:19 2012] Source does appear to be extended
[Thu Jan  5 22:32:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 23:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 23:15:59 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Thu Jan  5 23:15:59 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.743
[Thu Jan  5 23:15:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Thu Jan  5 23:22:14 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan  5 23:22:14 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan  5 23:22:14 2012] Fit fullrun_mos2_xmm0505981301_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jan  5 23:22:14 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan  5 23:22:14 2012] fullrun_mos2_xmm0505981301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan  5 23:22:14 2012] Fit fullrun_mos2_xmm0505981301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan  5 23:22:22 2012] Spatial fit model total counts = 10211.900000, observed total counts = 10212.000000
[Thu Jan  5 23:22:22 2012] Offset between fit and detection position for source 2 = 0.011635 pixels
[Thu Jan  5 23:22:22 2012] 10273.660000 total counts/ 2226.440000 bgd. counts: snr = 170.545544
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011635 pixels
  Position = (276.6, 290.6) = 2 40 31.73 61 13 44.9
  Extent = 5.7 (5.6-5.8)" x 5.2 (5.1-5.3)", rotation angle = 42 (33-53) degrees
  Source counts = 8047.2 +/- 101.4
  Background counts = 2226.4
  Rate = 0.6 +/- 0.008
[Thu Jan  5 23:22:22 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 23:22:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 23:22:22 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 23:22:22 2012] Source does appear to be extended
[Thu Jan  5 23:22:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Fri Jan  6 00:36:34 2012] Counts = 8047.220000, rescaling region sizes by 2.000000
[Fri Jan  6 00:36:34 2012] XMMSAS src. selection expression = ellipse(24016.245000, 25235.891800, 682.232420, 621.165618, 42.347190, X, Y)
[Fri Jan  6 00:36:34 2012] Writing source region out to fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2_src.reg
[Fri Jan  6 00:36:34 2012] Extracting stamp from image fullrun_mos2_xmm0505981301_pi300-10000_cl_sm2.00.img.gz, (237, 251) - (316, 330)
[Fri Jan  6 00:36:34 2012] XMMSAS bgd. selection expression = annulus(24016.245000, 25235.891800, 2274.108065, 4548.216131, X, Y)
[Fri Jan  6 00:36:34 2012] Writing fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2.gif
[Fri Jan  6 00:36:39 2012] Mean detx,y = (90.23, 61.64) 
[Fri Jan  6 00:36:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 00:37:22 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 00:37:22 2012] Setting source spectrum file to fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jan  6 00:37:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jan  6 00:44:27 2012] Updating aperture counts using extracted products
[Fri Jan  6 00:44:27 2012] Error reading totcts from fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jan  6 00:44:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:44:27 2012] Using photon index=1.80, rate=0.603, arf fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2.arf
[Fri Jan  6 00:44:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:44:27 2012] Updating source flux to 6.7e-12
[Fri Jan  6 00:45:38 2012] Reading fit data from xmm0505981301/analysis//spectral/fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jan  6 00:45:38 2012] Spectral fit parameter nH value = 5.60818e+21
[Fri Jan  6 00:45:38 2012] Spectral fit parameter PhoIndex value = 1.62826
[Fri Jan  6 00:45:38 2012] Failed to get F(0.3-8.0) from xmm0505981301/analysis//spectral/fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 00:45:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 00:45:38 2012] Using Nh = 5.6e+21, photon index=1.63, rate=0.603, arf fullrun_mos2_xmm0505981301_pi300-10000_pass1_cl_src2.arf
[Fri Jan  6 00:45:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 00:45:38 2012] Updating source flux to 1e-11