[Mon Dec 19 19:06:10 2011] Detection parameters:
  Position = (276.2, 290.1) = 2 40 31.60 61 13 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35481.7 +/- 223.5
  Background counts = 74.8
  Rate = 3 +/- 0.02

[Mon Dec 19 19:06:10 2011] Off-axis axis estimate = 1.72'
[Mon Dec 19 19:08:05 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 19:08:05 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Dec 19 19:08:05 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Dec 19 19:08:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Dec 19 19:19:00 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 19 19:19:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 19:19:00 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 19 19:19:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 19:19:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 19:19:00 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 19:19:00 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 19:19:00 2011] Fit fullrun_pn_xmm0505981201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 19:30:34 2011] Spatial fit model total counts = 26082.000000, observed total counts = 26082.000000
[Mon Dec 19 19:30:34 2011] Offset between fit and detection position for source 1 = 0.075914 pixels
[Mon Dec 19 19:30:34 2011] 26158.260000 total counts/ 5576.160000 bgd. counts: snr = 275.627198
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.075914 pixels
  Position = (276.2, 290.2) = 2 40 31.60 61 13 44.5
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 20582.1 +/- 161.7
  Background counts = 5576.2
  Rate = 2 +/- 0.02
[Mon Dec 19 19:30:34 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 19:30:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 19:30:34 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 19:30:34 2011] Source does appear to be extended
[Mon Dec 19 19:30:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 19:30:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 19:30:39 2011] Initial guess for spatial extent in simple fitting = 5.76"
[Mon Dec 19 19:30:39 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.201
[Mon Dec 19 19:30:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.76"
[Mon Dec 19 19:39:25 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 19 19:39:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 19:39:25 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 19 19:39:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 19:39:25 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 19:39:25 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 19:39:25 2011] fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 19:39:25 2011] Fit fullrun_pn_xmm0505981201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 19:44:05 2011] Spatial fit model total counts = 26111.400000, observed total counts = 26082.000000
[Mon Dec 19 19:44:05 2011] Offset between fit and detection position for source 1 = 0.000272 pixels
[Mon Dec 19 19:44:05 2011] 26187.450000 total counts/ 5580.250000 bgd. counts: snr = 275.862176
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000272 pixels
  Position = (276.2, 290.2) = 2 40 31.60 61 13 44.5
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 20607.2 +/- 161.8
  Background counts = 5580.2
  Rate = 2 +/- 0.02
[Mon Dec 19 19:44:05 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 19:44:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 19:44:05 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 19:44:05 2011] Source does appear to be extended
[Mon Dec 19 19:44:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 19:44:10 2011] Counts = 20607.200000, rescaling region sizes by 3.000000
[Mon Dec 19 19:44:10 2011] XMMSAS src. selection expression = ellipse(23985.116400, 25197.536600, 1036.447230, 1036.447230, 0.000000, X, Y)
[Mon Dec 19 19:44:10 2011] Writing source region out to fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 19 19:44:10 2011] Extracting stamp from image fullrun_pn_xmm0505981201_pi300-10000_cl_sm2.00.img.gz, (217, 231) - (336, 350)
[Mon Dec 19 19:44:10 2011] XMMSAS bgd. selection expression = annulus(23985.116400, 25197.536600, 5182.236149, 10364.472298, X, Y) && !ellipse(28072.468600, 18046.472600, 467.386413, 467.386413, 0.000000, X, Y) && !ellipse(22057.254760, 29013.825600, 469.413614, 469.413614, 0.000000, X, Y) && !ellipse(19554.397720, 28081.721252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22913.758000, 23654.890000, 1229.480035, 1229.480035, 0.000000, X, Y) && !ellipse(32611.476000, 15723.794000, 1889.152054, 1889.152054, 0.000000, X, Y)
[Mon Dec 19 19:44:10 2011] Writing fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1.gif
[Mon Dec 19 19:44:30 2011] Mean detx,y = (100.30, -217.86) 
[Mon Dec 19 19:44:37 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 19:48:39 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 19:48:40 2011] Setting source spectrum file to fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 19:48:40 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 20:56:33 2011] Updating aperture counts using extracted products
[Mon Dec 19 20:56:33 2011] Error reading totcts from fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 20:56:33 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 20:56:33 2011] Using photon index=1.80, rate=2, arf fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 20:56:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 20:56:33 2011] Updating source flux to 4.8e-12
[Mon Dec 19 20:58:01 2011] Reading fit data from xmm0505981201/analysis//spectral/fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 19 20:58:01 2011] Spectral fit parameter nH value = 5.44901e+21
[Mon Dec 19 20:58:01 2011] Spectral fit parameter PhoIndex value = 1.6117
[Mon Dec 19 20:58:01 2011] Failed to get F(0.3-8.0) from xmm0505981201/analysis//spectral/fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 20:58:01 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 20:58:01 2011] Using Nh = 5.4e+21, photon index=1.61, rate=2, arf fullrun_pn_xmm0505981201_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 20:58:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 20:58:01 2011] Updating source flux to 9.6e-12