[Sun Aug  5 10:13:07 2012] Detection parameters:
  Position = (370.4, 277.4) = 2 39 34.97 61 12 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.7 +/- 13.0
  Background counts = 58.3
  Rate = 0.008 +/- 0.001

[Sun Aug  5 10:13:07 2012] Off-axis axis estimate = 5.44'
[Sun Aug  5 10:16:08 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:16:08 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Sun Aug  5 10:16:08 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.775
[Sun Aug  5 10:16:08 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.15"
[Sun Aug  5 10:32:36 2012] fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_src6.ximg exists
[Sun Aug  5 10:32:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_src6.csv
[Sun Aug  5 10:32:36 2012] fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Aug  5 10:32:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_src6.csv
[Sun Aug  5 10:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 10:32:36 2012] fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Aug  5 10:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Aug  5 10:32:36 2012] fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Aug  5 10:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Aug  5 10:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 10:45:29 2012] Spatial fit model total counts = -1170.460000, observed total counts = 336.000000
[Sun Aug  5 10:45:29 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug  5 10:45:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 10:45:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 10:45:29 2012] Assessing source extent using major
[Sun Aug  5 10:45:29 2012] Source does appear to be extended
[Sun Aug  5 10:45:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 10:45:29 2012] Deleting source due to low Poisson probability 0.9