[Sun Aug  5 10:13:50 2012] Detection parameters:
  Position = (325.1, 206.2) = 2 40 2.33 61 7 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2205.0 +/- 56.6
  Background counts = 11.7
  Rate = 0.2 +/- 0.005

[Sun Aug  5 10:13:51 2012] Off-axis axis estimate = 6.96'
[Sun Aug  5 10:38:35 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:38:35 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Sun Aug  5 10:38:35 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.166
[Sun Aug  5 10:38:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.91"
[Sun Aug  5 10:45:27 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug  5 10:45:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_src2.csv
[Sun Aug  5 10:45:27 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug  5 10:45:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_src2.csv
[Sun Aug  5 10:45:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 10:45:27 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug  5 10:45:27 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug  5 10:45:27 2012] Fit fullrun_mos2_xmm0505981001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug  5 10:45:31 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.404250 pixels away
[Sun Aug  5 10:45:31 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 10:45:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 10:45:31 2012] Assessing source extent using major
[Sun Aug  5 10:45:31 2012] Source does appear to be extended
[Sun Aug  5 10:45:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 10:55:14 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:55:14 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Sun Aug  5 10:55:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.166
[Sun Aug  5 10:55:14 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.91"
[Sun Aug  5 11:04:14 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug  5 11:04:15 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug  5 11:04:15 2012] Fit fullrun_mos2_xmm0505981001_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Aug  5 11:04:15 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug  5 11:04:15 2012] fullrun_mos2_xmm0505981001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug  5 11:04:15 2012] Fit fullrun_mos2_xmm0505981001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Aug  5 11:04:17 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.404250 pixels away
[Sun Aug  5 11:04:17 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:04:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:04:17 2012] Assessing source extent using major
[Sun Aug  5 11:04:17 2012] Source does appear to be extended
[Sun Aug  5 11:04:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 11:52:32 2012] Counts = 2205.024902, rescaling region sizes by 2.000000
[Sun Aug  5 11:52:32 2012] XMMSAS src. selection expression = ellipse(28234.273926, 17890.774948, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Aug  5 11:52:32 2012] Writing source region out to fullrun_mos2_xmm0505981001_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 11:52:32 2012] Extracting stamp from image fullrun_mos2_xmm0505981001_pi300-10000_cl_sm2.00.img.gz, (250, 131) - (400, 281)
[Sun Aug  5 11:52:32 2012] XMMSAS bgd. selection expression = annulus(28234.273926, 17890.774948, 4350.000000, 8700.000000, X, Y) && !ellipse(23996.009400, 25115.567600, 437.649613, 395.877611, 217.131054, X, Y)
[Sun Aug  5 11:52:32 2012] Writing fullrun_mos2_xmm0505981001_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 11:53:04 2012] Mean detx,y = (7647.23, 3665.73) 
[Sun Aug  5 11:53:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 11:55:02 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 11:55:02 2012] Setting source spectrum file to fullrun_mos2_xmm0505981001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 11:55:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505981001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 11:58:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug  5 11:58:51 2012] rmf not generated due to insufficient counts
[Sun Aug  5 11:59:28 2012] Updating aperture counts using extracted products
[Sun Aug  5 11:59:28 2012] Error reading totcts from fullrun_mos2_xmm0505981001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 11:59:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 11:59:28 2012] Using photon index=1.80, rate=0.207, arf fullrun_mos2_xmm0505981001_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 11:59:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 11:59:28 2012] Updating source flux to 3.3e-12
[Sun Aug  5 11:59:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting