[Wed Jun 20 19:43:40 2012] Detection parameters:
  Position = (215.3, 211.7) = 2 41 8.50 61 8 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 9.5
  Background counts = 10.5
  Rate = 0.01 +/- 0.002

[Wed Jun 20 19:43:40 2012] Off-axis axis estimate = 8.71'
[Wed Jun 20 19:45:00 2012] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 19:45:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 19:45:00 2012] Initial guess for spatial extent in simple fitting = 10.78"
[Wed Jun 20 19:45:00 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.930
[Wed Jun 20 19:45:00 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.78"
[Wed Jun 20 20:03:33 2012] fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 20 20:03:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_src5.csv
[Wed Jun 20 20:03:33 2012] fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 20 20:03:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_src5.csv
[Wed Jun 20 20:03:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:03:34 2012] fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 20 20:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 20 20:03:34 2012] fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 20 20:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 20 20:03:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:13:41 2012] Spatial fit model total counts = 168.751000, observed total counts = 138.000000
[Wed Jun 20 20:13:41 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 20:13:41 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 20:13:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 20:13:41 2012] Assessing source extent using major
[Wed Jun 20 20:13:41 2012] Source does appear to be extended
[Wed Jun 20 20:13:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 20:13:41 2012] Deleting source due to low Poisson probability 0.9