[Wed Jun 20 19:43:56 2012] Detection parameters:
  Position = (362.5, 269.4) = 2 39 40.01 61 12 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.8 +/- 7.1
  Background counts = 4.7
  Rate = 0.004 +/- 0.0009

[Wed Jun 20 19:43:56 2012] Off-axis axis estimate = 5.10'
[Wed Jun 20 20:03:34 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 20:03:34 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Wed Jun 20 20:03:34 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.951
[Wed Jun 20 20:03:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.98"
[Wed Jun 20 20:08:16 2012] fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 20 20:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 20:08:16 2012] fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 20 20:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 20:08:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:08:16 2012] fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 20 20:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 20 20:08:16 2012] fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 20 20:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 20 20:08:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505980801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:13:42 2012] Spatial fit model total counts = 82.723300, observed total counts = 72.000000
[Wed Jun 20 20:13:42 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 20:13:42 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 20:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 20:13:42 2012] Assessing source extent using major
[Wed Jun 20 20:13:42 2012] Source does appear to be extended
[Wed Jun 20 20:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 20:13:42 2012] Deleting source due to low Poisson probability 0.9