[Wed Nov 23 22:28:22 2011] Detection parameters:
  Position = (425.6, 160.6) = 17 45 24.99 -21 41 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.9 +/- 10.9
  Background counts = 17.3
  Rate = 0.001 +/- 0.0002

[Wed Nov 23 22:28:22 2011] Off-axis axis estimate = 13.59'
[Wed Nov 23 22:58:58 2011] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:58:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 22:58:58 2011] Initial guess for spatial extent in simple fitting = 13.23"
[Wed Nov 23 22:58:58 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.977
[Wed Nov 23 22:58:58 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 13.23"
[Wed Nov 23 23:19:02 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_src21.ximg exists
[Wed Nov 23 23:19:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_src21.csv
[Wed Nov 23 23:19:02 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Nov 23 23:19:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_src21.csv
[Wed Nov 23 23:19:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:19:02 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Nov 23 23:19:02 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Nov 23 23:19:02 2011] Fit fullrun_mos2_xmm0505940201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Nov 23 23:19:08 2011] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 15.301015 pixels away
[Wed Nov 23 23:19:08 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 23:19:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 23:19:08 2011] Assessing source extent using major
[Wed Nov 23 23:19:08 2011] Source does appear to be extended
[Wed Nov 23 23:19:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 23:37:24 2011] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 23:37:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 23:37:24 2011] Initial guess for spatial extent in simple fitting = 13.23"
[Wed Nov 23 23:37:24 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.977
[Wed Nov 23 23:37:24 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 13.23"
[Wed Nov 23 23:56:08 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_src20.ximg exists
[Wed Nov 23 23:56:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_src20.csv
[Wed Nov 23 23:56:08 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Nov 23 23:56:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_src20.csv
[Wed Nov 23 23:56:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:56:08 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Nov 23 23:56:08 2011] fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Nov 23 23:56:08 2011] Fit fullrun_mos2_xmm0505940201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Nov 23 23:56:13 2011] Spatial fit model total counts = 258.998000, observed total counts = 259.000000
[Wed Nov 23 23:56:13 2011] Offset between fit and detection position for source 17 = 0.225904 pixels
[Wed Nov 23 23:56:13 2011] 262.826300 total counts/ 233.356000 bgd. counts: snr = 1.929190
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.225904 pixels
  Position = (425.4, 160.7) = 17 45 25.06 -21 41 29.6
  Extent = 5.1 (3.3-7.7)", rotation angle = 0
  Source counts = 29.5 +/- 16.2
  Background counts = 233.4
  Rate = 0.0006 +/- 0.0003
[Wed Nov 23 23:56:13 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 23:56:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 23:56:13 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 23:56:13 2011] Source does appear to be extended
[Wed Nov 23 23:56:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 00:44:46 2011] XMMSAS src. selection expression = ellipse(36957.839600, 13933.789600, 304.956609, 304.956609, 0.000000, X, Y)
[Thu Nov 24 00:44:46 2011] Writing source region out to fullrun_mos2_xmm0505940201_pi300-10000_pass1_cl_src17_src.reg
[Thu Nov 24 00:44:46 2011] Extracting stamp from image fullrun_mos2_xmm0505940201_pi300-10000_cl_sm2.00.img.gz, (408, 143) - (443, 178)
[Thu Nov 24 00:44:46 2011] XMMSAS bgd. selection expression = annulus(36957.839600, 13933.789600, 508.261015, 1016.522029, X, Y)
[Thu Nov 24 00:44:46 2011] Writing fullrun_mos2_xmm0505940201_pi300-10000_pass1_cl_src17.gif
[Thu Nov 24 00:47:25 2011] Mean detx,y = (11948.62, 10593.03) 
[Thu Nov 24 00:47:26 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 00:47:32 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 00:47:32 2011] Setting source spectrum file to fullrun_mos2_xmm0505940201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Nov 24 00:47:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505940201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Nov 24 01:08:25 2011] Not generating rmf since there are only 29 counts
[Thu Nov 24 01:08:25 2011] rmf not generated due to insufficient counts
[Thu Nov 24 01:08:50 2011] Updating aperture counts using extracted products
[Thu Nov 24 01:08:50 2011] Error reading totcts from fullrun_mos2_xmm0505940201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Nov 24 01:08:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 01:08:50 2011] Using photon index=1.80, rate=0.000612, arf fullrun_mos2_xmm0505940201_pi300-10000_pass1_cl_src17.arf
[Thu Nov 24 01:08:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 01:08:50 2011] Updating source flux to 3.2e-14
[Thu Nov 24 01:09:37 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting