[Wed Nov 23 22:28:08 2011] Detection parameters:
  Position = (303.5, 271.7) = 17 46 3.09 -21 33 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1149.6 +/- 42.5
  Background counts = 32.6
  Rate = 0.03 +/- 0.0009

[Wed Nov 23 22:28:08 2011] Off-axis axis estimate = 1.97'
[Wed Nov 23 22:41:49 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:41:49 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Nov 23 22:41:49 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.029
[Wed Nov 23 22:41:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Wed Nov 23 22:58:58 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 23 22:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_src1.csv
[Wed Nov 23 22:58:58 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 23 22:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_src1.csv
[Wed Nov 23 22:58:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 22:58:58 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 23 22:58:58 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 23 22:58:58 2011] Fit fullrun_mos1_xmm0505940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 23 23:19:05 2011] Spatial fit model total counts = 1203.130000, observed total counts = 1199.000000
[Wed Nov 23 23:19:05 2011] Offset between fit and detection position for source 1 = 0.164779 pixels
[Wed Nov 23 23:19:05 2011] 1204.820000 total counts/ 424.818000 bgd. counts: snr = 37.843758
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.164779 pixels
  Position = (303.5, 271.6) = 17 46 3.09 -21 33 27.6
  Extent = 5.6 (5.2-5.9)", rotation angle = 0
  Source counts = 780.0 +/- 34.7
  Background counts = 424.8
  Rate = 0.02 +/- 0.0007
[Wed Nov 23 23:19:05 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 23:19:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 23:19:05 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 23:19:05 2011] Source does appear to be extended
[Wed Nov 23 23:19:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 23:22:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 23 23:22:40 2011] Initial guess for spatial extent in simple fitting = 5.56"
[Wed Nov 23 23:22:40 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.711
[Wed Nov 23 23:22:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.56"
[Wed Nov 23 23:37:24 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 23 23:37:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_src1.csv
[Wed Nov 23 23:37:24 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 23 23:37:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_src1.csv
[Wed Nov 23 23:37:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:37:24 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 23 23:37:24 2011] fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 23 23:37:24 2011] Fit fullrun_mos1_xmm0505940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 23 23:56:11 2011] Spatial fit model total counts = 1200.090000, observed total counts = 1199.000000
[Wed Nov 23 23:56:11 2011] Offset between fit and detection position for source 1 = 0.002882 pixels
[Wed Nov 23 23:56:11 2011] 1201.765000 total counts/ 423.961000 bgd. counts: snr = 37.775239
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002882 pixels
  Position = (303.5, 271.6) = 17 46 3.09 -21 33 27.7
  Extent = 5.6 (5.2-5.9)", rotation angle = 0
  Source counts = 777.8 +/- 34.7
  Background counts = 424.0
  Rate = 0.02 +/- 0.0007
[Wed Nov 23 23:56:11 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 23:56:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 23:56:11 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 23:56:11 2011] Source does appear to be extended
[Wed Nov 23 23:56:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 00:22:25 2011] XMMSAS src. selection expression = ellipse(26356.947400, 23578.341200, 334.000210, 334.000210, 0.000000, X, Y)
[Thu Nov 24 00:22:25 2011] Writing source region out to fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1_src.reg
[Thu Nov 24 00:22:25 2011] Extracting stamp from image fullrun_mos1_xmm0505940201_pi300-10000_cl_sm2.00.img.gz, (284, 252) - (323, 291)
[Thu Nov 24 00:22:25 2011] XMMSAS bgd. selection expression = annulus(26356.947400, 23578.341200, 556.667016, 1113.334032, X, Y) && !ellipse(27708.537720, 24980.875800, 361.956810, 361.956810, 0.000000, X, Y) && !ellipse(25202.239400, 24244.702800, 333.730410, 333.730410, 0.000000, X, Y)
[Thu Nov 24 00:22:25 2011] Writing fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1.gif
[Thu Nov 24 00:22:27 2011] Mean detx,y = (946.40, -1741.24) 
[Thu Nov 24 00:22:28 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 00:22:33 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 00:22:33 2011] Setting source spectrum file to fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 00:22:33 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Nov 24 01:08:49 2011] Updating aperture counts using extracted products
[Thu Nov 24 01:08:49 2011] Error reading totcts from fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 01:08:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 01:08:49 2011] Using photon index=1.80, rate=0.0161, arf fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 01:08:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 01:08:49 2011] Updating source flux to 2e-13
[Thu Nov 24 01:09:37 2011] Reading fit data from xmm0505940201/analysis//spectral/fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Nov 24 01:09:37 2011] Spectral fit parameter nH value = 6.11927e+21
[Thu Nov 24 01:09:37 2011] Spectral fit parameter PhoIndex value = 6.66201
[Thu Nov 24 01:09:37 2011] Failed to get F(0.3-8.0) from xmm0505940201/analysis//spectral/fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Nov 24 01:09:37 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 01:09:37 2011] Using Nh = 6.1e+21, photon index=6.66, rate=0.0161, arf fullrun_mos1_xmm0505940201_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 01:09:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 01:09:37 2011] Updating source flux to 1.2e-13