[Sat Mar 24 06:05:49 2012] Detection parameters:
  Position = (293.2, 275.2) = 14 0 52.59 -1 45 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 452.3 +/- 25.6
  Background counts = 12.8
  Rate = 0.02 +/- 0.001

[Sat Mar 24 06:05:50 2012] Off-axis axis estimate = 1.73'
[Sat Mar 24 07:24:32 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 07:24:32 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Mar 24 07:24:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Mar 24 07:24:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Mar 24 07:56:06 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 24 07:56:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 07:56:06 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 24 07:56:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 07:56:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 07:56:06 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 24 07:56:06 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 24 07:56:06 2012] Fit fullrun_mos2_xmm0505930401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 24 07:56:23 2012] Spatial fit model total counts = 469.450000, observed total counts = 448.000000
[Sat Mar 24 07:56:23 2012] Offset between fit and detection position for source 1 = 0.122027 pixels
[Sat Mar 24 07:56:23 2012] 467.854000 total counts/ 178.352000 bgd. counts: snr = 21.677669
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.122027 pixels
  Position = (293.2, 275.3) = 14 0 52.59 -1 45 10.3
  Extent = 4.6 (4.0-5.0)", rotation angle = 0
  Source counts = 289.5 +/- 21.6
  Background counts = 178.4
  Rate = 0.01 +/- 0.001
[Sat Mar 24 07:56:23 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 07:56:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 07:56:23 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 07:56:23 2012] Source does appear to be extended
[Sat Mar 24 07:56:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 09:09:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 24 09:09:43 2012] Initial guess for spatial extent in simple fitting = 4.56"
[Sat Mar 24 09:09:43 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.939
[Sat Mar 24 09:09:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.56"
[Sat Mar 24 09:39:35 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 24 09:39:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 09:39:35 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 24 09:39:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 09:39:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 09:39:36 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 24 09:39:36 2012] fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 24 09:39:36 2012] Fit fullrun_mos2_xmm0505930401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 24 09:39:52 2012] Spatial fit model total counts = 469.448000, observed total counts = 448.000000
[Sat Mar 24 09:39:52 2012] Offset between fit and detection position for source 1 = 0.000008 pixels
[Sat Mar 24 09:39:52 2012] 467.852000 total counts/ 178.342000 bgd. counts: snr = 21.678876
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000008 pixels
  Position = (293.2, 275.3) = 14 0 52.59 -1 45 10.3
  Extent = 4.6 (4.0-5.0)", rotation angle = 0
  Source counts = 289.5 +/- 21.6
  Background counts = 178.3
  Rate = 0.01 +/- 0.001
[Sat Mar 24 09:39:52 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 09:39:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 09:39:52 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 09:39:52 2012] Source does appear to be extended
[Sat Mar 24 09:39:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 10:32:58 2012] XMMSAS src. selection expression = ellipse(25463.331400, 23905.899200, 273.445808, 273.445808, 0.000000, X, Y)
[Sat Mar 24 10:32:58 2012] Writing source region out to fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar 24 10:32:58 2012] Extracting stamp from image fullrun_mos2_xmm0505930401_pi300-10000_cl_sm2.00.img.gz, (278, 260) - (309, 291)
[Sat Mar 24 10:32:58 2012] XMMSAS bgd. selection expression = annulus(25463.331400, 23905.899200, 455.743013, 911.486026, X, Y)
[Sat Mar 24 10:32:58 2012] Writing fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1.gif
[Sat Mar 24 10:33:01 2012] Mean detx,y = (24.38, 75.74) 
[Sat Mar 24 10:33:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 10:33:17 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 10:33:17 2012] Setting source spectrum file to fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 24 10:33:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar 24 10:51:15 2012] Updating aperture counts using extracted products
[Sat Mar 24 10:51:15 2012] Error reading totcts from fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 24 10:51:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 10:51:16 2012] Using photon index=1.80, rate=0.013, arf fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1.arf
[Sat Mar 24 10:51:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 10:51:16 2012] Updating source flux to 1.8e-13
[Sat Mar 24 10:51:44 2012] Reading fit data from xmm0505930401/analysis//spectral/fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1_pl.csv
[Sat Mar 24 10:51:44 2012] Spectral fit parameter nH value = 2.79361e+15
[Sat Mar 24 10:51:44 2012] Spectral fit parameter PhoIndex value = 2.1907
[Sat Mar 24 10:51:44 2012] Failed to get F(0.3-8.0) from xmm0505930401/analysis//spectral/fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Mar 24 10:51:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 10:51:44 2012] Using Nh = 2.8e+15, photon index=2.19, rate=0.013, arf fullrun_mos2_xmm0505930401_pi300-10000_pass1_cl_src1.arf
[Sat Mar 24 10:51:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 10:51:44 2012] Updating source flux to 1.6e-13