[Sat Mar 24 06:05:10 2012] Detection parameters:
  Position = (293.3, 275.1) = 14 0 52.56 -1 45 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 472.3 +/- 26.7
  Background counts = 13.1
  Rate = 0.02 +/- 0.001

[Sat Mar 24 06:05:10 2012] Off-axis axis estimate = 1.73'
[Sat Mar 24 06:55:19 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 06:55:19 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Mar 24 06:55:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sat Mar 24 06:55:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Mar 24 07:24:32 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 24 07:24:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 07:24:32 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 24 07:24:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 07:24:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 07:24:32 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 24 07:24:32 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 24 07:24:32 2012] Fit fullrun_mos1_xmm0505930401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 24 07:56:19 2012] Spatial fit model total counts = 504.356000, observed total counts = 507.000000
[Sat Mar 24 07:56:19 2012] Offset between fit and detection position for source 3 = 0.145747 pixels
[Sat Mar 24 07:56:19 2012] 505.595000 total counts/ 214.523000 bgd. counts: snr = 19.873003
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.145747 pixels
  Position = (293.4, 275.3) = 14 0 52.55 -1 45 10.5
  Extent = 5.0 (4.5-5.5)", rotation angle = 0
  Source counts = 291.1 +/- 22.5
  Background counts = 214.5
  Rate = 0.01 +/- 0.001
[Sat Mar 24 07:56:19 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 07:56:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 07:56:19 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 07:56:19 2012] Source does appear to be extended
[Sat Mar 24 07:56:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 08:42:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 24 08:42:04 2012] Initial guess for spatial extent in simple fitting = 4.98"
[Sat Mar 24 08:42:04 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.832
[Sat Mar 24 08:42:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.98"
[Sat Mar 24 09:09:42 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 24 09:09:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 09:09:43 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 24 09:09:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 09:09:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 09:09:43 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 24 09:09:43 2012] fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 24 09:09:43 2012] Fit fullrun_mos1_xmm0505930401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 24 09:39:48 2012] Spatial fit model total counts = 505.765000, observed total counts = 507.000000
[Sat Mar 24 09:39:48 2012] Offset between fit and detection position for source 3 = 0.000337 pixels
[Sat Mar 24 09:39:48 2012] 507.003000 total counts/ 214.440000 bgd. counts: snr = 19.978667
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000337 pixels
  Position = (293.4, 275.3) = 14 0 52.55 -1 45 10.5
  Extent = 5.0 (4.5-5.5)", rotation angle = 0
  Source counts = 292.6 +/- 22.5
  Background counts = 214.4
  Rate = 0.01 +/- 0.001
[Sat Mar 24 09:39:48 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 09:39:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 09:39:48 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 09:39:48 2012] Source does appear to be extended
[Sat Mar 24 09:39:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 10:20:28 2012] XMMSAS src. selection expression = ellipse(25475.510000, 23900.659800, 299.614209, 299.614209, 0.000000, X, Y)
[Sat Mar 24 10:20:28 2012] Writing source region out to fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3_src.reg
[Sat Mar 24 10:20:28 2012] Extracting stamp from image fullrun_mos1_xmm0505930401_pi300-10000_cl_sm2.00.img.gz, (276, 258) - (311, 292)
[Sat Mar 24 10:20:28 2012] XMMSAS bgd. selection expression = annulus(25475.510000, 23900.659800, 499.357014, 998.714029, X, Y) && !ellipse(26841.812740, 23432.064800, 374.101611, 374.101611, 0.000000, X, Y)
[Sat Mar 24 10:20:28 2012] Writing fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3.gif
[Sat Mar 24 10:20:31 2012] Mean detx,y = (297.70, -206.20) 
[Sat Mar 24 10:20:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 10:20:44 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 10:20:44 2012] Setting source spectrum file to fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 24 10:20:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Mar 24 10:51:14 2012] Updating aperture counts using extracted products
[Sat Mar 24 10:51:14 2012] Error reading totcts from fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 24 10:51:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 10:51:14 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3.arf
[Sat Mar 24 10:51:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 10:51:14 2012] Updating source flux to 1.6e-13
[Sat Mar 24 10:51:30 2012] Reading fit data from xmm0505930401/analysis//spectral/fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3_pl.csv
[Sat Mar 24 10:51:30 2012] Spectral fit parameter nH value = 5.4213e+19
[Sat Mar 24 10:51:30 2012] Spectral fit parameter PhoIndex value = 2.28893
[Sat Mar 24 10:51:30 2012] Failed to get F(0.3-8.0) from xmm0505930401/analysis//spectral/fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Mar 24 10:51:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 10:51:30 2012] Using Nh = 5.4e+19, photon index=2.29, rate=0.0133, arf fullrun_mos1_xmm0505930401_pi300-10000_pass1_cl_src3.arf
[Sat Mar 24 10:51:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 10:51:30 2012] Updating source flux to 1.4e-13