[Wed Jun 19 21:34:02 2013] Detection parameters:
  Position = (467.4, 325.8) = 8 19 52.74 20 57 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 544.5 +/- 30.9
  Background counts = 258.9
  Rate = 0.006 +/- 0.0004

[Wed Jun 19 21:34:03 2013] Off-axis axis estimate = 12.41'
[Wed Jun 19 21:40:26 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 21:40:26 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Wed Jun 19 21:40:26 2013] source mask rpix=2.9, npix_max = 46, mask sum = 31, frac = 0.669
[Wed Jun 19 21:40:26 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.63"
[Wed Jun 19 22:32:35 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 19 22:32:35 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_src2.csv
[Wed Jun 19 22:32:35 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 19 22:32:35 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_src2.csv
[Wed Jun 19 22:32:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 22:32:36 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 19 22:32:36 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 19 22:32:36 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 19 22:32:36 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 19 22:32:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 23:31:35 2013] Spatial fit model total counts = -3586.010000, observed total counts = 931.000000
[Wed Jun 19 23:31:35 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 23:31:35 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 23:31:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 23:31:35 2013] Assessing source extent using major
[Wed Jun 19 23:31:35 2013] Source does appear to be extended
[Wed Jun 19 23:31:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 23:31:53 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 23:31:53 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Wed Jun 19 23:31:53 2013] source mask rpix=2.9, npix_max = 46, mask sum = 31, frac = 0.669
[Wed Jun 19 23:31:53 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.63"
[Thu Jun 20 00:26:43 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 20 00:26:43 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_src2.csv
[Thu Jun 20 00:26:43 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 20 00:26:43 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_src2.csv
[Thu Jun 20 00:26:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:26:44 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 20 00:26:44 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 20 00:26:44 2013] fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 20 00:26:44 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 20 00:26:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 02:19:14 2013] Spatial fit model total counts = -5589.800000, observed total counts = 931.000000
[Thu Jun 20 02:19:14 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 02:19:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 02:19:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 02:19:14 2013] Assessing source extent using major
[Thu Jun 20 02:19:14 2013] Source does appear to be extended
[Thu Jun 20 02:19:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 02:19:45 2013] XMMSAS src. selection expression = ellipse(40613.127655, 28298.241547, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 02:19:45 2013] Writing source region out to fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 20 02:19:45 2013] Extracting stamp from image fullrun_pn_xmm0505930301_pi300-10000_cl_sm2.00.img.gz, (430, 288) - (505, 363)
[Thu Jun 20 02:19:45 2013] XMMSAS bgd. selection expression = annulus(40613.127655, 28298.241547, 1087.500000, 2175.000000, X, Y) && !ellipse(38423.163910, 25974.883820, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 02:19:45 2013] Writing fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2.gif
[Thu Jun 20 02:21:21 2013] Mean detx,y = (13608.13, 2677.35) 
[Thu Jun 20 02:21:27 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 20 02:21:54 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 20 02:21:55 2013] Setting source spectrum file to fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 20 02:21:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 20 03:19:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 03:19:28 2013] rmf not generated due to insufficient counts
[Thu Jun 20 05:29:06 2013] Updating aperture counts using extracted products
[Thu Jun 20 05:29:06 2013] Total counts from fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 639.00
[Thu Jun 20 05:29:06 2013] Total counts from fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 2288.00
[Thu Jun 20 05:29:06 2013] Got source and background scale factors 766484.000000, 5739782.000000
[Thu Jun 20 05:29:06 2013] User source parameters:
  Position = (467.4, 325.8) = 8 19 52.74 20 57 37.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 333.5 +/- 26.3
  Background aperture counts = 305.5
  Rate = 0.007 +/- 0.0006

[Thu Jun 20 05:29:06 2013] Updating counts from extracted products
[Thu Jun 20 05:29:06 2013] Set source signif. to 333.46/17.48 = 19.08
[Thu Jun 20 05:29:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 05:29:22 2013] Using photon index=1.80, rate=0.00726, arf fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2.arf
[Thu Jun 20 05:29:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 05:29:22 2013] Updating source flux to 1.9e-13
[Thu Jun 20 05:30:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 05:30:07 2013] xmm0505930301/analysis//spectral/fullrun_pn_xmm0505930301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete