[Wed Jun 19 21:34:51 2013] Detection parameters:
  Position = (358.3, 231.8) = 8 20 26.63 20 50 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.6 +/- 27.1
  Background counts = 94.1
  Rate = 0.008 +/- 0.0005

[Wed Jun 19 21:34:52 2013] Off-axis axis estimate = 6.50'
[Wed Jun 19 22:58:29 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 22:58:29 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Wed Jun 19 22:58:29 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.808
[Wed Jun 19 22:58:29 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.68"
[Wed Jun 19 23:31:27 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 19 23:31:27 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 19 23:31:27 2013] Fit fullrun_mos2_xmm0505930301_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Jun 19 23:31:27 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 19 23:31:27 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 19 23:31:27 2013] Fit fullrun_mos2_xmm0505930301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun 19 23:31:43 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.845712 pixels away
[Wed Jun 19 23:31:43 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 23:31:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 23:31:43 2013] Assessing source extent using major
[Wed Jun 19 23:31:43 2013] Source does appear to be extended
[Wed Jun 19 23:31:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 01:29:45 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 01:29:45 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Thu Jun 20 01:29:45 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.808
[Thu Jun 20 01:29:45 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.68"
[Thu Jun 20 02:19:03 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 20 02:19:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_src3.csv
[Thu Jun 20 02:19:03 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 20 02:19:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_src3.csv
[Thu Jun 20 02:19:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 02:19:03 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 20 02:19:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 20 02:19:03 2013] fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 20 02:19:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 20 02:19:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505930301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 02:19:28 2013] Spatial fit model total counts = 674.904000, observed total counts = 751.000000
[Thu Jun 20 02:19:28 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 02:19:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 02:19:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 02:19:28 2013] Assessing source extent using major
[Thu Jun 20 02:19:28 2013] Source does appear to be extended
[Thu Jun 20 02:19:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 04:53:25 2013] XMMSAS src. selection expression = ellipse(31124.796356, 20116.423615, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 04:53:25 2013] Writing source region out to fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14_src.reg
[Thu Jun 20 04:53:25 2013] Extracting stamp from image fullrun_mos2_xmm0505930301_pi300-10000_cl_sm2.00.img.gz, (321, 194) - (396, 269)
[Thu Jun 20 04:53:25 2013] XMMSAS bgd. selection expression = annulus(31124.796356, 20116.423615, 1087.500000, 2175.000000, X, Y) && !ellipse(29176.027500, 22879.315800, 1067.640031, 286.344808, 346.675000, X, Y)
[Thu Jun 20 04:53:25 2013] Writing fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14.gif
[Thu Jun 20 04:57:08 2013] Mean detx,y = (-2523.13, -8487.82) 
[Thu Jun 20 04:57:10 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 20 04:57:36 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 20 04:57:36 2013] Setting source spectrum file to fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Jun 20 04:57:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Jun 20 05:15:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 05:15:26 2013] rmf not generated due to insufficient counts
[Thu Jun 20 05:29:34 2013] Updating aperture counts using extracted products
[Thu Jun 20 05:29:34 2013] Total counts from fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 602.00
[Thu Jun 20 05:29:34 2013] Total counts from fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14_bgd.pi.gz = 2804.00
[Thu Jun 20 05:29:34 2013] Got source and background scale factors 1258332.000000, 10210707.000000
[Thu Jun 20 05:29:34 2013] User source parameters:
  Position = (358.3, 231.8) = 8 20 26.63 20 50 48.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 256.4 +/- 25.6
  Background aperture counts = 345.6
  Rate = 0.003 +/- 0.0003

[Thu Jun 20 05:29:34 2013] Updating counts from extracted products
[Thu Jun 20 05:29:34 2013] Set source signif. to 256.44/18.59 = 13.80
[Thu Jun 20 05:29:42 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 05:29:42 2013] Using photon index=1.80, rate=0.00342, arf fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14.arf
[Thu Jun 20 05:29:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 05:29:42 2013] Updating source flux to 5.9e-14
[Thu Jun 20 05:29:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 05:30:00 2013] xmm0505930301/analysis//spectral/fullrun_mos2_xmm0505930301_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete