[Fri Apr  6 02:24:37 2012] Detection parameters:
  Position = (301.9, 321.3) = 14 0 52.58 -1 45 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1704.4 +/- 50.4
  Background counts = 35.2
  Rate = 0.03 +/- 0.001

[Fri Apr  6 02:24:38 2012] Off-axis axis estimate = 1.68'
[Fri Apr  6 03:01:21 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 03:01:21 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Apr  6 03:01:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Fri Apr  6 03:01:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Apr  6 03:16:31 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Apr  6 03:16:31 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Apr  6 03:16:31 2012] Fit fullrun_mos1_xmm0505930101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Apr  6 03:16:31 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Apr  6 03:16:31 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Apr  6 03:16:31 2012] Fit fullrun_mos1_xmm0505930101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Apr  6 03:17:41 2012] Spatial fit model total counts = 1762.830000, observed total counts = 1763.000000
[Fri Apr  6 03:17:41 2012] Offset between fit and detection position for source 1 = 0.237786 pixels
[Fri Apr  6 03:17:41 2012] 1763.169000 total counts/ 636.339000 bgd. counts: snr = 44.669813
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237786 pixels
  Position = (301.7, 321.5) = 14 0 52.62 -1 45 12.1
  Extent = 4.9 (4.7-5.2)", rotation angle = 0
  Source counts = 1126.8 +/- 42.0
  Background counts = 636.3
  Rate = 0.02 +/- 0.0008
[Fri Apr  6 03:17:41 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 03:17:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 03:17:41 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 03:17:41 2012] Source does appear to be extended
[Fri Apr  6 03:17:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 03:44:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 03:44:54 2012] Initial guess for spatial extent in simple fitting = 4.93"
[Fri Apr  6 03:44:54 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.843
[Fri Apr  6 03:44:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.93"
[Fri Apr  6 03:58:21 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Apr  6 03:58:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 03:58:21 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Apr  6 03:58:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 03:58:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 03:58:22 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Apr  6 03:58:22 2012] fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Apr  6 03:58:22 2012] Fit fullrun_mos1_xmm0505930101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Apr  6 03:59:19 2012] Spatial fit model total counts = 1762.840000, observed total counts = 1763.000000
[Fri Apr  6 03:59:19 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Fri Apr  6 03:59:19 2012] 1763.170000 total counts/ 636.330000 bgd. counts: snr = 44.670525
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (301.7, 321.5) = 14 0 52.62 -1 45 12.1
  Extent = 4.9 (4.7-5.2)", rotation angle = 0
  Source counts = 1126.8 +/- 42.0
  Background counts = 636.3
  Rate = 0.02 +/- 0.0008
[Fri Apr  6 03:59:19 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 03:59:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 03:59:19 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 03:59:19 2012] Source does appear to be extended
[Fri Apr  6 03:59:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 04:35:55 2012] Counts = 1126.840000, rescaling region sizes by 2.000000
[Fri Apr  6 04:35:55 2012] XMMSAS src. selection expression = ellipse(26202.088000, 27920.573200, 591.850817, 591.850817, 0.000000, X, Y)
[Fri Apr  6 04:35:55 2012] Writing source region out to fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1_src.reg
[Fri Apr  6 04:35:55 2012] Extracting stamp from image fullrun_mos1_xmm0505930101_pi300-10000_cl_sm2.00.img.gz, (268, 287) - (336, 355)
[Fri Apr  6 04:35:55 2012] XMMSAS bgd. selection expression = annulus(26202.088000, 27920.573200, 1972.836057, 3945.672114, X, Y) && !ellipse(26125.400085, 23616.657593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.048660, 24737.682200, 442.717613, 442.717613, 0.000000, X, Y) && !ellipse(27951.710000, 26446.991000, 245.040807, 245.040807, 0.000000, X, Y) && !ellipse(28307.536700, 24822.581800, 292.598408, 292.598408, 0.000000, X, Y) && !ellipse(30039.747040, 29010.002800, 325.133609, 325.133609, 0.000000, X, Y) && !ellipse(28234.242065, 25825.235748, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Apr  6 04:35:55 2012] Writing fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1.gif
[Fri Apr  6 04:35:58 2012] Mean detx,y = (332.55, -340.40) 
[Fri Apr  6 04:35:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 04:36:06 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 04:36:06 2012] Setting source spectrum file to fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Apr  6 04:36:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Apr  6 04:49:14 2012] Updating aperture counts using extracted products
[Fri Apr  6 04:49:14 2012] Error reading totcts from fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Apr  6 04:49:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 04:49:14 2012] Using photon index=1.80, rate=0.022, arf fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1.arf
[Fri Apr  6 04:49:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 04:49:14 2012] Updating source flux to 2.2e-13
[Fri Apr  6 04:49:27 2012] Reading fit data from xmm0505930101/analysis//spectral/fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Apr  6 04:49:27 2012] Spectral fit parameter nH value = 8.90943e+19
[Fri Apr  6 04:49:27 2012] Spectral fit parameter PhoIndex value = 2.32
[Fri Apr  6 04:49:27 2012] Failed to get F(0.3-8.0) from xmm0505930101/analysis//spectral/fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Apr  6 04:49:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 04:49:27 2012] Using Nh = 8.9e+19, photon index=2.32, rate=0.022, arf fullrun_mos1_xmm0505930101_pi300-10000_pass1_cl_src1.arf
[Fri Apr  6 04:49:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 04:49:27 2012] Updating source flux to 1.9e-13