[Mon Mar 26 10:17:27 2012] Detection parameters:
  Position = (276.2, 479.6) = 0 38 19.99 40 56 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.1 +/- 7.0
  Background counts = 2.5
  Rate = 0.006 +/- 0.001

[Mon Mar 26 10:17:27 2012] Off-axis axis estimate = 13.23'
[Mon Mar 26 10:45:35 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 10:45:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 10:45:35 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Mon Mar 26 10:45:35 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.001
[Mon Mar 26 10:45:35 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.05"
[Mon Mar 26 11:00:52 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Mar 26 11:00:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_src3.csv
[Mon Mar 26 11:00:52 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Mar 26 11:00:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_src3.csv
[Mon Mar 26 11:00:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 11:00:52 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Mar 26 11:00:52 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Mar 26 11:00:52 2012] Fit fullrun_mos2_xmm0505900301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Mar 26 11:01:00 2012] Spatial fit model total counts = 48.983500, observed total counts = 47.000000
[Mon Mar 26 11:01:00 2012] Offset between fit and detection position for source 5 = 0.299354 pixels
[Mon Mar 26 11:01:00 2012] 48.804100 total counts/ 28.871400 bgd. counts: snr = 3.709644
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.299354 pixels
  Position = (275.9, 479.6) = 0 38 20.10 40 56 40.5
  Extent = 4.8 (3.3-7.2)", rotation angle = 0
  Source counts = 19.9 +/- 7.0
  Background counts = 28.9
  Rate = 0.004 +/- 0.001
[Mon Mar 26 11:01:00 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 11:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 11:01:00 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 11:01:00 2012] Source does appear to be extended
[Mon Mar 26 11:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 11:26:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 11:26:06 2012] Initial guess for spatial extent in simple fitting = 4.79"
[Mon Mar 26 11:26:06 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.171
[Mon Mar 26 11:26:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.79"
[Mon Mar 26 11:39:14 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_src3.ximg exists
[Mon Mar 26 11:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_src3.csv
[Mon Mar 26 11:39:14 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Mar 26 11:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_src3.csv
[Mon Mar 26 11:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 11:39:14 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Mar 26 11:39:14 2012] fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Mar 26 11:39:14 2012] Fit fullrun_mos2_xmm0505900301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Mar 26 11:39:22 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Mon Mar 26 11:39:22 2012] Source 3 in spatial fitting is no longer close to this source
[Mon Mar 26 11:39:22 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 11:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 11:39:22 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 11:39:22 2012] Source does appear to be extended
[Mon Mar 26 11:39:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 11:50:07 2012] XMMSAS src. selection expression = ellipse(23958.890560, 41678.132200, 287.332208, 287.332208, 0.000000, X, Y)
[Mon Mar 26 11:50:07 2012] Writing source region out to fullrun_mos2_xmm0505900301_pi300-10000_pass1_cl_src5_src.reg
[Mon Mar 26 11:50:07 2012] Extracting stamp from image fullrun_mos2_xmm0505900301_pi300-10000_cl_sm2.00.img.gz, (259, 463) - (292, 496)
[Mon Mar 26 11:50:07 2012] XMMSAS bgd. selection expression = annulus(23958.890560, 41678.132200, 478.887014, 957.774028, X, Y)
[Mon Mar 26 11:50:07 2012] Writing fullrun_mos2_xmm0505900301_pi300-10000_pass1_cl_src5.gif
[Mon Mar 26 11:50:49 2012] Mean detx,y = (7455.77, 12968.14) 
[Mon Mar 26 11:50:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 11:51:05 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 11:51:05 2012] Setting source spectrum file to fullrun_mos2_xmm0505900301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar 26 11:51:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505900301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Mar 26 11:51:39 2012] Not generating rmf since there are only 19 counts
[Mon Mar 26 11:51:39 2012] rmf not generated due to insufficient counts
[Mon Mar 26 11:52:07 2012] Updating aperture counts using extracted products
[Mon Mar 26 11:52:07 2012] Error reading totcts from fullrun_mos2_xmm0505900301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar 26 11:52:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 11:52:07 2012] Using photon index=1.80, rate=0.00368, arf fullrun_mos2_xmm0505900301_pi300-10000_pass1_cl_src5.arf
[Mon Mar 26 11:52:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 11:52:07 2012] Updating source flux to 1.6e-13
[Mon Mar 26 11:52:09 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Mar 26 11:52:10 2012] xmm0505900301/analysis//spectral/fullrun_mos2_xmm0505900301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete