[Thu Dec 29 11:50:26 2011] Detection parameters:
  Position = (349.0, 388.7) = 0 37 51.70 41 54 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.0 +/- 30.4
  Background counts = 393.6
  Rate = 0.01 +/- 0.002

[Thu Dec 29 11:50:26 2011] Off-axis axis estimate = 7.50'
[Thu Dec 29 12:04:29 2011] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 12:04:29 2011] Initial guess for spatial extent in simple fitting = 10.18"
[Thu Dec 29 12:04:29 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Thu Dec 29 12:04:29 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 10.18"
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src8.ximg exists
[Thu Dec 29 13:25:38 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src8.csv
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Dec 29 13:25:38 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src8.csv
[Thu Dec 29 13:25:38 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Dec 29 13:25:38 2011] Fit fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Dec 29 13:57:58 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.423000 pixels away
[Thu Dec 29 13:57:58 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:57:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:57:58 2011] Assessing source extent using major
[Thu Dec 29 13:57:58 2011] Source does appear to be extended
[Thu Dec 29 13:57:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:58:11 2011] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 13:58:11 2011] Initial guess for spatial extent in simple fitting = 10.18"
[Thu Dec 29 13:58:11 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Thu Dec 29 13:58:11 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 10.18"
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src8.ximg exists
[Thu Dec 29 15:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src8.csv
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Dec 29 15:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src8.csv
[Thu Dec 29 15:50:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Dec 29 15:50:30 2011] Fit fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Dec 29 16:18:59 2011] Spatial fit model total counts = 2438.000000, observed total counts = 2438.000000
[Thu Dec 29 16:18:59 2011] Offset between fit and detection position for source 8 = 0.120775 pixels
[Thu Dec 29 16:18:59 2011] 2429.910000 total counts/ 2325.490000 bgd. counts: snr = 2.165342
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.120775 pixels
  Position = (348.9, 388.8) = 0 37 51.75 41 54 35.7
  Extent = 5.2 (3.1-8.8)", rotation angle = 0
  Source counts = 104.4 +/- 49.3
  Background counts = 2325.5
  Rate = 0.02 +/- 0.008
[Thu Dec 29 16:18:59 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 16:18:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 16:18:59 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 16:18:59 2011] Source does appear to be extended
[Thu Dec 29 16:18:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 16:19:13 2011] XMMSAS src. selection expression = ellipse(30305.327880, 33775.004740, 312.045009, 312.045009, 0.000000, X, Y)
[Thu Dec 29 16:19:13 2011] Writing source region out to fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src8_src.reg
[Thu Dec 29 16:19:13 2011] Extracting stamp from image fullrun_pn_xmm0505900101_pi300-10000_cl_sm2.00.img.gz, (331, 371) - (367, 407)
[Thu Dec 29 16:19:13 2011] XMMSAS bgd. selection expression = annulus(30305.327880, 33775.004740, 520.075015, 1040.150030, X, Y)
[Thu Dec 29 16:19:13 2011] Writing fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src8.gif
[Thu Dec 29 17:27:03 2011] Mean detx,y = (-1180.55, 10469.41) 
[Thu Dec 29 17:27:09 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 17:27:48 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 17:27:49 2011] Setting source spectrum file to fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Dec 29 17:27:49 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Dec 29 18:26:04 2011] Updating aperture counts using extracted products
[Thu Dec 29 18:26:04 2011] Error reading totcts from fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Dec 29 18:26:04 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 18:26:04 2011] Using photon index=1.80, rate=0.0162, arf fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src8.arf
[Thu Dec 29 18:26:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 18:26:04 2011] Updating source flux to 1.1e-13