[Thu Dec 29 11:50:26 2011] Detection parameters:
  Position = (333.3, 323.5) = 0 37 57.85 41 49 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.7 +/- 30.7
  Background counts = 457.3
  Rate = 0.02 +/- 0.003

[Thu Dec 29 11:50:26 2011] Off-axis axis estimate = 3.11'
[Thu Dec 29 12:04:29 2011] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 12:04:29 2011] Initial guess for spatial extent in simple fitting = 7.98"
[Thu Dec 29 12:04:29 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.146
[Thu Dec 29 12:04:29 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.98"
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Dec 29 13:25:38 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src7.csv
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Dec 29 13:25:38 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src7.csv
[Thu Dec 29 13:25:38 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Dec 29 13:25:38 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Dec 29 13:25:38 2011] Fit fullrun_pn_xmm0505900101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Dec 29 13:57:58 2011] Spatial fit model total counts = 2444.630000, observed total counts = 2450.000000
[Thu Dec 29 13:57:58 2011] Offset between fit and detection position for source 7 = 7.286264 pixels
[Thu Dec 29 13:57:58 2011] 2552.547000 total counts/ 2057.880000 bgd. counts: snr = 10.904429
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 7.286264 pixels
  Position = (330.7, 316.7) = 0 37 58.87 41 49 22.0
  Extent = 15.5 (14.6-16.0)", rotation angle = 0
  Source counts = 494.7 +/- 50.5
  Background counts = 2057.9
  Rate = 0.08 +/- 0.008
[Thu Dec 29 13:57:58 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:57:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:57:58 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:57:58 2011] Source does appear to be extended
[Thu Dec 29 13:57:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:58:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 13:58:11 2011] Initial guess for spatial extent in simple fitting = 15.50"
[Thu Dec 29 13:58:11 2011] source mask rpix=3.6, npix_max = 66, mask sum = 62, frac = 0.939
[Thu Dec 29 13:58:11 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 15.50"
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Dec 29 15:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src7.csv
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Dec 29 15:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src7.csv
[Thu Dec 29 15:50:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Dec 29 15:50:30 2011] fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Dec 29 15:50:30 2011] Fit fullrun_pn_xmm0505900101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Dec 29 16:18:59 2011] Spatial fit model total counts = 4489.990000, observed total counts = 4490.000000
[Thu Dec 29 16:18:59 2011] Offset between fit and detection position for source 7 = 9.454899 pixels
[Thu Dec 29 16:18:59 2011] 4672.810000 total counts/ 2834.650000 bgd. counts: snr = 34.524992
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 9.454899 pixels
  Position = (329.2, 307.3) = 0 37 59.45 41 48 41.4
  Extent = 26.7 (22.9-31.0)", rotation angle = 0
  Source counts = 1838.2 +/- 68.4
  Background counts = 2834.7
  Rate = 0.3 +/- 0.01
[Thu Dec 29 16:18:59 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 16:18:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 16:18:59 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 16:18:59 2011] Source does appear to be extended
[Thu Dec 29 16:18:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 16:19:13 2011] Counts = 1838.160000, rescaling region sizes by 2.000000
[Thu Dec 29 16:19:13 2011] XMMSAS src. selection expression = ellipse(28589.088400, 26688.474000, 3208.248092, 3208.248092, 0.000000, X, Y)
[Thu Dec 29 16:19:13 2011] Writing source region out to fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src7_src.reg
[Thu Dec 29 16:19:13 2011] Extracting stamp from image fullrun_pn_xmm0505900101_pi300-10000_cl_sm2.00.img.gz, (145, 123) - (514, 492)
[Thu Dec 29 16:19:13 2011] XMMSAS bgd. selection expression = annulus(28589.088400, 26688.474000, 10694.160308, 21388.320615, X, Y) && !ellipse(22914.410080, 12761.339000, 400.004812, 400.004812, 0.000000, X, Y) && !ellipse(41267.186400, 31264.330000, 2100.896060, 2100.896060, 0.000000, X, Y) && !ellipse(41007.548000, 31902.214000, 2086.392060, 2086.392060, 0.000000, X, Y) && !ellipse(33951.590118, 32777.562714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41381.992279, 30756.803986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39749.364319, 32941.208099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30305.327880, 33775.004740, 416.060012, 416.060012, 0.000000, X, Y)
[Thu Dec 29 16:19:13 2011] Writing fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src7.gif
[Thu Dec 29 16:58:05 2011] Mean detx,y = (-3123.59, 3393.95) 
[Thu Dec 29 16:58:17 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 17:26:36 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 17:26:36 2011] Setting source spectrum file to fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Dec 29 17:26:36 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Dec 29 18:26:04 2011] Updating aperture counts using extracted products
[Thu Dec 29 18:26:04 2011] Error reading totcts from fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Dec 29 18:26:04 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 18:26:04 2011] Using photon index=1.80, rate=0.286, arf fullrun_pn_xmm0505900101_pi300-10000_pass1_cl_src7.arf
[Thu Dec 29 18:26:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 18:26:04 2011] Updating source flux to 7.3e-13