[Fri Dec 23 02:52:45 2011] Detection parameters:
  Position = (408.1, 286.8) = 11 18 37.73 15 29 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.1 +/- 6.7
  Background counts = 4.5
  Rate = 0.003 +/- 0.0009

[Fri Dec 23 02:52:45 2011] Off-axis axis estimate = 8.00'
[Fri Dec 23 04:09:40 2011] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 04:09:40 2011] Initial guess for spatial extent in simple fitting = 10.43"
[Fri Dec 23 04:09:40 2011] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.043
[Fri Dec 23 04:09:40 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 10.43"
[Fri Dec 23 04:36:47 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec 23 04:36:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_src7.csv
[Fri Dec 23 04:36:47 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec 23 04:36:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_src7.csv
[Fri Dec 23 04:36:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 04:36:47 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 23 04:36:47 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 23 04:36:47 2011] Fit fullrun_mos1_xmm0505880301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 23 04:57:46 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.169733 pixels away
[Fri Dec 23 04:57:46 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:57:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:57:46 2011] Assessing source extent using major
[Fri Dec 23 04:57:46 2011] Source does appear to be extended
[Fri Dec 23 04:57:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 06:02:17 2011] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 06:02:17 2011] Initial guess for spatial extent in simple fitting = 10.43"
[Fri Dec 23 06:02:17 2011] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.043
[Fri Dec 23 06:02:17 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 10.43"
[Fri Dec 23 06:25:56 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_src7.ximg exists
[Fri Dec 23 06:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_src7.csv
[Fri Dec 23 06:25:56 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Dec 23 06:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_src7.csv
[Fri Dec 23 06:25:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 06:25:56 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Dec 23 06:25:56 2011] fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Dec 23 06:25:56 2011] Fit fullrun_mos1_xmm0505880301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Dec 23 06:46:39 2011] Spatial fit model total counts = 59.929500, observed total counts = 64.000000
[Fri Dec 23 06:46:39 2011] Offset between fit and detection position for source 6 = 0.579578 pixels
[Fri Dec 23 06:46:39 2011] 65.382500 total counts/ 33.672400 bgd. counts: snr = 5.464628
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.579578 pixels
  Position = (407.6, 286.7) = 11 18 37.90 15 29 43.9
  Extent = 8.0 (6.8-15.2)", rotation angle = 0
  Source counts = 31.7 +/- 8.1
  Background counts = 33.7
  Rate = 0.003 +/- 0.0007
[Fri Dec 23 06:46:39 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 06:46:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 06:46:39 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 06:46:39 2011] Source does appear to be extended
[Fri Dec 23 06:46:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 07:12:52 2011] XMMSAS src. selection expression = ellipse(35409.422600, 24892.279800, 478.064414, 478.064414, 0.000000, X, Y)
[Fri Dec 23 07:12:52 2011] Writing source region out to fullrun_mos1_xmm0505880301_pi300-10000_pass1_cl_src6_src.reg
[Fri Dec 23 07:12:52 2011] Extracting stamp from image fullrun_mos1_xmm0505880301_pi300-10000_cl_sm2.00.img.gz, (380, 259) - (435, 314)
[Fri Dec 23 07:12:52 2011] XMMSAS bgd. selection expression = annulus(35409.422600, 24892.279800, 796.774023, 1593.548046, X, Y)
[Fri Dec 23 07:12:52 2011] Writing fullrun_mos1_xmm0505880301_pi300-10000_pass1_cl_src6.gif
[Fri Dec 23 07:15:16 2011] Mean detx,y = (-6012.33, 7018.95) 
[Fri Dec 23 07:15:19 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 07:16:03 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 07:16:03 2011] Setting source spectrum file to fullrun_mos1_xmm0505880301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec 23 07:16:03 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505880301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Dec 23 07:16:48 2011] Not generating rmf since there are only 31 counts
[Fri Dec 23 07:16:48 2011] rmf not generated due to insufficient counts
[Fri Dec 23 07:21:06 2011] Updating aperture counts using extracted products
[Fri Dec 23 07:21:06 2011] Error reading totcts from fullrun_mos1_xmm0505880301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec 23 07:21:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:21:07 2011] Using photon index=1.80, rate=0.00273, arf fullrun_mos1_xmm0505880301_pi300-10000_pass1_cl_src6.arf
[Fri Dec 23 07:21:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:21:07 2011] Updating source flux to 4.4e-14
[Fri Dec 23 07:21:09 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Dec 23 07:21:10 2011] xmm0505880301/analysis//spectral/fullrun_mos1_xmm0505880301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete