[Sun Mar 25 18:04:00 2012] Detection parameters: Position = (410.2, 382.7) = 16 32 8.78 34 9 50.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 42.7 +/- 9.5 Background counts = 9.8 Rate = 0.004 +/- 0.0009 [Sun Mar 25 18:04:01 2012] Off-axis axis estimate = 10.15' [Sun Mar 25 19:05:30 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting [Sun Mar 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 11.50" [Sun Mar 25 19:05:30 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910 [Sun Mar 25 19:05:30 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.50" [Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src6.ximg exists [Sun Mar 25 19:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src6.csv [Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src6_1.ximg exists [Sun Mar 25 19:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src6.csv [Sun Mar 25 19:33:55 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Sun Mar 25 19:33:55 2012] Fit fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Sun Mar 25 20:12:42 2012] Spatial fit model total counts = 199.117000, observed total counts = 201.000000 [Sun Mar 25 20:12:42 2012] Offset between fit and detection position for source 5 = 7.019210 pixels Spatial fit parameters: Offset between fit and detection position for source 5 = 7.019210 pixels Position = (417.0, 381.2) = 16 32 6.39 34 9 44.0 Extent = 23.0 (23.0-46.0)", rotation angle = 0 Source counts = 193.5 +/- 13.9 Background counts = 0.0 Rate = 0.01 +/- 0.0008 Deleting source due to low signal-to-noise ratio