[Sun Mar 25 18:04:00 2012] Detection parameters:
  Position = (494.0, 307.0) = 16 31 39.49 34 4 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.3 +/- 9.4
  Background counts = 11.0
  Rate = 0.002 +/- 0.0005

[Sun Mar 25 18:04:01 2012] Off-axis axis estimate = 14.19'
[Sun Mar 25 19:05:30 2012] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Sun Mar 25 19:05:30 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.228
[Sun Mar 25 19:05:30 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.52"
[Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Mar 25 19:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src12.csv
[Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Mar 25 19:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src12.csv
[Sun Mar 25 19:33:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Mar 25 19:33:55 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Mar 25 19:33:55 2012] Fit fullrun_mos1_xmm0505880101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Mar 25 20:12:42 2012] Spatial fit model total counts = 267.621000, observed total counts = 251.000000
[Sun Mar 25 20:12:42 2012] Offset between fit and detection position for source 11 = 4.102404 pixels
[Sun Mar 25 20:12:42 2012] 255.092700 total counts/ 50.908700 bgd. counts: snr = 28.617105
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.102404 pixels
  Position = (497.4, 309.3) = 16 31 38.31 34 4 30.7
  Extent = 27.0 (22.0-54.1)", rotation angle = 0
  Source counts = 204.2 +/- 16.0
  Background counts = 50.9
  Rate = 0.01 +/- 0.0009
[Sun Mar 25 20:12:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:12:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:12:42 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 20:12:42 2012] Source does appear to be extended
[Sun Mar 25 20:12:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 21:15:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 21:15:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 21:15:10 2012] Initial guess for spatial extent in simple fitting = 27.05"
[Sun Mar 25 21:15:10 2012] source mask rpix=6.2, npix_max = 180, mask sum = 130, frac = 0.720
[Sun Mar 25 21:15:10 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 27.05"
[Sun Mar 25 21:42:32 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Mar 25 21:42:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_src11.csv
[Sun Mar 25 21:42:32 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Mar 25 21:42:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_src11.csv
[Sun Mar 25 21:42:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 21:42:32 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Mar 25 21:42:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Mar 25 21:42:32 2012] fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Mar 25 21:42:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Mar 25 21:42:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505880101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 22:13:33 2012] Warning, spatial fit 11 centroid is now closest to src. 6
[Sun Mar 25 22:13:33 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 22:13:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 22:13:33 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 22:13:33 2012] Source does appear to be extended
[Sun Mar 25 22:13:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 23:05:18 2012] XMMSAS src. selection expression = ellipse(43221.254000, 26863.424000, 1622.844047, 1622.844047, 0.000000, X, Y)
[Sun Mar 25 23:05:18 2012] Writing source region out to fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11_src.reg
[Sun Mar 25 23:05:18 2012] Extracting stamp from image fullrun_mos1_xmm0505880101_pi300-10000_cl_sm2.00.img.gz, (404, 216) - (591, 403)
[Sun Mar 25 23:05:18 2012] XMMSAS bgd. selection expression = annulus(43221.254000, 26863.424000, 2704.740078, 5409.480156, X, Y) && !ellipse(38468.488654, 29831.290209, 694.116620, 538.315049, 193.042807, X, Y)
[Sun Mar 25 23:05:18 2012] Writing fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11.gif
[Sun Mar 25 23:09:38 2012] Mean detx,y = (-7272.25, 14378.82) 
[Sun Mar 25 23:09:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 23:11:21 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 23:11:21 2012] Setting source spectrum file to fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Mar 25 23:11:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Mar 25 23:27:08 2012] Updating aperture counts using extracted products
[Sun Mar 25 23:27:08 2012] Error reading totcts from fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Mar 25 23:27:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 23:27:08 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11.arf
[Sun Mar 25 23:27:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 23:27:08 2012] Updating source flux to 2.9e-13
[Sun Mar 25 23:27:33 2012] Reading fit data from xmm0505880101/analysis//spectral/fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11_pl.csv
[Sun Mar 25 23:27:33 2012] Spectral fit parameter nH value = 4.43666e+21
[Sun Mar 25 23:27:33 2012] Spectral fit parameter PhoIndex value = 4.40561
[Sun Mar 25 23:27:33 2012] Failed to get F(0.3-8.0) from xmm0505880101/analysis//spectral/fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Sun Mar 25 23:27:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 23:27:33 2012] Using Nh = 4.4e+21, photon index=4.41, rate=0.0115, arf fullrun_mos1_xmm0505880101_pi300-10000_pass1_cl_src11.arf
[Sun Mar 25 23:27:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 23:27:33 2012] Updating source flux to 1.9e-13