[Thu Feb 16 10:22:44 2012] Detection parameters:
  Position = (279.6, 498.3) = 0 39 16.71 40 51 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.2 +/- 19.0
  Background counts = 50.8
  Rate = 0.006 +/- 0.0005

[Thu Feb 16 10:22:44 2012] Off-axis axis estimate = 14.56'
[Thu Feb 16 10:25:59 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 10:25:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 10:25:59 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Thu Feb 16 10:25:59 2012] source mask rpix=3.2, npix_max = 53, mask sum = 30, frac = 0.563
[Thu Feb 16 10:25:59 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.71"
[Thu Feb 16 11:09:03 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_src8.ximg exists
[Thu Feb 16 11:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_src8.csv
[Thu Feb 16 11:09:03 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Feb 16 11:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_src8.csv
[Thu Feb 16 11:09:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 11:09:03 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Feb 16 11:09:03 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Feb 16 11:09:03 2012] Fit fullrun_pn_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Feb 16 12:07:32 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.653173 pixels away
[Thu Feb 16 12:07:32 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:07:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:07:32 2012] Assessing source extent using major
[Thu Feb 16 12:07:32 2012] Source does appear to be extended
[Thu Feb 16 12:07:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 12:07:56 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:07:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 12:07:56 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Thu Feb 16 12:07:56 2012] source mask rpix=3.2, npix_max = 53, mask sum = 30, frac = 0.563
[Thu Feb 16 12:07:56 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 13.71"
[Thu Feb 16 12:45:50 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_src8.ximg exists
[Thu Feb 16 12:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_src8.csv
[Thu Feb 16 12:45:50 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Feb 16 12:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_src8.csv
[Thu Feb 16 12:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:45:50 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Feb 16 12:45:50 2012] fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Feb 16 12:45:50 2012] Fit fullrun_pn_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Feb 16 13:28:27 2012] Source 9 is offset by 8.728804 and -1.490403 pixels which is larger than
2 X fitted extent = 1.542428 x 1.542428, not incorporating fit results
[Thu Feb 16 13:28:27 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.140605 pixels away
[Thu Feb 16 13:28:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:28:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:28:27 2012] Assessing source extent using major
[Thu Feb 16 13:28:27 2012] Source does appear to be extended
[Thu Feb 16 13:28:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:28:39 2012] XMMSAS src. selection expression = ellipse(24273.933990, 43307.862915, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 13:28:39 2012] Writing source region out to fullrun_pn_xmm0505760501_pi300-10000_pass1_cl_src9_src.reg
[Thu Feb 16 13:28:39 2012] Extracting stamp from image fullrun_pn_xmm0505760501_pi300-10000_cl_sm2.00.img.gz, (242, 461) - (317, 536)
[Thu Feb 16 13:28:39 2012] XMMSAS bgd. selection expression = annulus(24273.933990, 43307.862915, 1087.500000, 2175.000000, X, Y) && !ellipse(22495.250214, 42340.444580, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 13:28:39 2012] Writing fullrun_pn_xmm0505760501_pi300-10000_pass1_cl_src9.gif
[Thu Feb 16 13:35:31 2012] Mean detx,y = (-8143.16, -14509.67) 
[Thu Feb 16 13:35:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 13:36:03 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 13:36:03 2012] Setting source spectrum file to fullrun_pn_xmm0505760501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Feb 16 13:36:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505760501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Feb 16 13:55:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 13:55:35 2012] rmf not generated due to insufficient counts
[Thu Feb 16 14:44:49 2012] Updating aperture counts using extracted products
[Thu Feb 16 14:44:49 2012] Error reading totcts from fullrun_pn_xmm0505760501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Feb 16 14:44:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 14:44:50 2012] Using photon index=1.80, rate=0.00551, arf fullrun_pn_xmm0505760501_pi300-10000_pass1_cl_src9.arf
[Thu Feb 16 14:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 14:44:50 2012] Updating source flux to 5.1e-14
[Thu Feb 16 14:45:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting