[Thu Feb 16 10:23:29 2012] Detection parameters:
  Position = (279.2, 498.9) = 0 39 16.84 40 51 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.0 +/- 14.6
  Background counts = 14.3
  Rate = 0.003 +/- 0.0004

[Thu Feb 16 10:23:29 2012] Off-axis axis estimate = 14.60'
[Thu Feb 16 11:36:41 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:36:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 11:36:41 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Thu Feb 16 11:36:41 2012] source mask rpix=3.2, npix_max = 53, mask sum = 48, frac = 0.898
[Thu Feb 16 11:36:41 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.73"
[Thu Feb 16 12:07:25 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_src4.ximg exists
[Thu Feb 16 12:07:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_src4.csv
[Thu Feb 16 12:07:25 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Feb 16 12:07:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_src4.csv
[Thu Feb 16 12:07:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:07:25 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Feb 16 12:07:25 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Feb 16 12:07:25 2012] Fit fullrun_mos2_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Feb 16 12:07:43 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 16.888561 pixels away
[Thu Feb 16 12:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:07:43 2012] Assessing source extent using major
[Thu Feb 16 12:07:43 2012] Source does appear to be extended
[Thu Feb 16 12:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:07:31 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 13:07:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 13:07:31 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Thu Feb 16 13:07:31 2012] source mask rpix=3.2, npix_max = 53, mask sum = 48, frac = 0.898
[Thu Feb 16 13:07:31 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.73"
[Thu Feb 16 13:28:22 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass1_src4.ximg exists
[Thu Feb 16 13:28:22 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Feb 16 13:28:22 2012] Fit fullrun_mos2_xmm0505760501_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Feb 16 13:28:22 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Feb 16 13:28:22 2012] fullrun_mos2_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Feb 16 13:28:22 2012] Fit fullrun_mos2_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Feb 16 13:28:31 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 18.816505 pixels away
[Thu Feb 16 13:28:31 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:28:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:28:31 2012] Assessing source extent using major
[Thu Feb 16 13:28:31 2012] Source does appear to be extended
[Thu Feb 16 13:28:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 14:29:28 2012] XMMSAS src. selection expression = ellipse(24246.090698, 43354.485229, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 14:29:28 2012] Writing source region out to fullrun_mos2_xmm0505760501_pi300-10000_pass1_cl_src20_src.reg
[Thu Feb 16 14:29:28 2012] Extracting stamp from image fullrun_mos2_xmm0505760501_pi300-10000_cl_sm2.00.img.gz, (242, 461) - (317, 536)
[Thu Feb 16 14:29:28 2012] XMMSAS bgd. selection expression = annulus(24246.090698, 43354.485229, 1087.500000, 2175.000000, X, Y) && !ellipse(22481.973220, 42343.389400, 378.741611, 378.741611, 0.000000, X, Y)
[Thu Feb 16 14:29:28 2012] Writing fullrun_mos2_xmm0505760501_pi300-10000_pass1_cl_src20.gif
[Thu Feb 16 14:30:16 2012] Mean detx,y = (8272.25, 14291.84) 
[Thu Feb 16 14:30:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 14:30:36 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 14:30:36 2012] Setting source spectrum file to fullrun_mos2_xmm0505760501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Feb 16 14:30:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505760501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Feb 16 14:42:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 14:42:27 2012] rmf not generated due to insufficient counts
[Thu Feb 16 14:44:50 2012] Updating aperture counts using extracted products
[Thu Feb 16 14:44:50 2012] Error reading totcts from fullrun_mos2_xmm0505760501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Feb 16 14:44:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 14:44:51 2012] Using photon index=1.80, rate=0.0035, arf fullrun_mos2_xmm0505760501_pi300-10000_pass1_cl_src20.arf
[Thu Feb 16 14:44:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 14:44:51 2012] Updating source flux to 1.4e-13
[Thu Feb 16 14:45:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting