[Thu Feb 16 10:23:07 2012] Detection parameters:
  Position = (166.5, 232.1) = 0 39 59.83 40 31 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.6 +/- 18.1
  Background counts = 14.1
  Rate = 0.005 +/- 0.0005

[Thu Feb 16 10:23:07 2012] Off-axis axis estimate = 10.71'
[Thu Feb 16 11:09:04 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:09:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 11:09:04 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Thu Feb 16 11:09:04 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.020
[Thu Feb 16 11:09:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.78"
[Thu Feb 16 11:36:41 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 16 11:36:41 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 16 11:36:41 2012] Fit fullrun_mos1_xmm0505760501_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Feb 16 11:36:41 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 11:36:41 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 11:36:41 2012] Fit fullrun_mos1_xmm0505760501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 12:07:39 2012] Spatial fit model total counts = 436.188000, observed total counts = 436.000000
[Thu Feb 16 12:07:39 2012] Offset between fit and detection position for source 2 = 0.307963 pixels
[Thu Feb 16 12:07:39 2012] 439.037000 total counts/ 289.187000 bgd. counts: snr = 8.811855
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.307963 pixels
  Position = (166.7, 232.3) = 0 39 59.74 40 31 56.4
  Extent = 6.7 (5.8-7.7)", rotation angle = 0
  Source counts = 149.8 +/- 21.0
  Background counts = 289.2
  Rate = 0.004 +/- 0.0005
[Thu Feb 16 12:07:39 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:07:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:07:39 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 12:07:39 2012] Source does appear to be extended
[Thu Feb 16 12:07:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 12:45:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:45:50 2012] Initial guess for spatial extent in simple fitting = 6.66"
[Thu Feb 16 12:45:50 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.970
[Thu Feb 16 12:45:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.66"
[Thu Feb 16 13:07:30 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 16 13:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 13:07:30 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 16 13:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 13:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 13:07:30 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 13:07:30 2012] fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 13:07:30 2012] Fit fullrun_mos1_xmm0505760501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 13:28:29 2012] Warning, spatial fit 1 centroid is now closest to src. 18
[Thu Feb 16 13:28:29 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:28:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:28:29 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 13:28:29 2012] Source does appear to be extended
[Thu Feb 16 13:28:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 14:16:13 2012] XMMSAS src. selection expression = ellipse(14455.629800, 20163.124200, 399.559811, 399.559811, 0.000000, X, Y)
[Thu Feb 16 14:16:13 2012] Writing source region out to fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2_src.reg
[Thu Feb 16 14:16:13 2012] Extracting stamp from image fullrun_mos1_xmm0505760501_pi300-10000_cl_sm2.00.img.gz, (144, 209) - (190, 255)
[Thu Feb 16 14:16:13 2012] XMMSAS bgd. selection expression = annulus(14455.629800, 20163.124200, 665.933019, 1331.866038, X, Y) && !ellipse(14031.493393, 21716.103989, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 14:16:13 2012] Writing fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2.gif
[Thu Feb 16 14:16:16 2012] Mean detx,y = (-10448.99, -10454.26) 
[Thu Feb 16 14:16:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 14:16:23 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 14:16:23 2012] Setting source spectrum file to fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 14:16:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Feb 16 14:44:50 2012] Updating aperture counts using extracted products
[Thu Feb 16 14:44:50 2012] Error reading totcts from fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 14:44:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 14:44:50 2012] Using photon index=1.80, rate=0.00388, arf fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2.arf
[Thu Feb 16 14:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 14:44:50 2012] Updating source flux to 1.3e-13
[Thu Feb 16 14:45:02 2012] Reading fit data from xmm0505760501/analysis//spectral/fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2_pl.csv
[Thu Feb 16 14:45:02 2012] Spectral fit parameter nH value = 1.90482e+21
[Thu Feb 16 14:45:02 2012] Spectral fit parameter PhoIndex value = 2.08856
[Thu Feb 16 14:45:02 2012] Failed to get F(0.3-8.0) from xmm0505760501/analysis//spectral/fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 14:45:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 14:45:02 2012] Using Nh = 1.9e+21, photon index=2.09, rate=0.00388, arf fullrun_mos1_xmm0505760501_pi300-10000_pass1_cl_src2.arf
[Thu Feb 16 14:45:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 14:45:02 2012] Updating source flux to 1.4e-13