[Thu Mar  8 05:34:55 2012] Detection parameters:
  Position = (137.8, 318.8) = 0 41 53.46 40 21 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5903.6 +/- 92.8
  Background counts = 33.7
  Rate = 0.2 +/- 0.003

[Thu Mar  8 05:34:56 2012] Off-axis axis estimate = 11.74'
[Thu Mar  8 05:37:20 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 05:37:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 05:37:20 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Thu Mar  8 05:37:20 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.107
[Thu Mar  8 05:37:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.30"
[Thu Mar  8 06:31:26 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar  8 06:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_src1.csv
[Thu Mar  8 06:31:26 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar  8 06:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_src1.csv
[Thu Mar  8 06:31:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 06:31:26 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar  8 06:31:26 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar  8 06:31:26 2012] Fit fullrun_pn_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar  8 07:40:49 2012] Spatial fit model total counts = 6337.620000, observed total counts = 6353.000000
[Thu Mar  8 07:40:49 2012] Offset between fit and detection position for source 1 = 0.372692 pixels
[Thu Mar  8 07:40:49 2012] 6260.370000 total counts/ 1747.900000 bgd. counts: snr = 107.933444
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.372692 pixels
  Position = (138.0, 318.5) = 0 41 53.38 40 21 18.3
  Extent = 8.0 (7.8-8.3)", rotation angle = 0
  Source counts = 4512.5 +/- 79.1
  Background counts = 1747.9
  Rate = 0.2 +/- 0.003
[Thu Mar  8 07:40:49 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 07:40:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 07:40:49 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 07:40:49 2012] Source does appear to be extended
[Thu Mar  8 07:40:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 07:41:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 07:41:06 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Thu Mar  8 07:41:06 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Thu Mar  8 07:41:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.03"
[Thu Mar  8 08:37:04 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar  8 08:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_src1.csv
[Thu Mar  8 08:37:04 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar  8 08:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_src1.csv
[Thu Mar  8 08:37:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 08:37:05 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar  8 08:37:05 2012] fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar  8 08:37:05 2012] Fit fullrun_pn_xmm0505760401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar  8 09:34:45 2012] Spatial fit model total counts = 5627.370000, observed total counts = 5633.000000
[Thu Mar  8 09:34:45 2012] Offset between fit and detection position for source 1 = 0.058620 pixels
[Thu Mar  8 09:34:45 2012] 5594.370000 total counts/ 1462.090000 bgd. counts: snr = 108.069387
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.058620 pixels
  Position = (138.0, 318.5) = 0 41 53.40 40 21 18.2
  Extent = 7.2 (6.9-7.4)", rotation angle = 0
  Source counts = 4132.3 +/- 74.8
  Background counts = 1462.1
  Rate = 0.2 +/- 0.003
[Thu Mar  8 09:34:45 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 09:34:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 09:34:45 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 09:34:45 2012] Source does appear to be extended
[Thu Mar  8 09:34:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 09:35:01 2012] Counts = 4132.280000, rescaling region sizes by 2.000000
[Thu Mar  8 09:35:01 2012] XMMSAS src. selection expression = ellipse(11954.250000, 27659.242000, 861.894025, 861.894025, 0.000000, X, Y)
[Thu Mar  8 09:35:01 2012] Writing source region out to fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar  8 09:35:01 2012] Extracting stamp from image fullrun_pn_xmm0505760401_pi300-10000_cl_sm2.00.img.gz, (88, 269) - (187, 368)
[Thu Mar  8 09:35:01 2012] XMMSAS bgd. selection expression = annulus(11954.250000, 27659.242000, 2872.980083, 5745.960165, X, Y) && !ellipse(9585.489525, 31256.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12057.139267, 28904.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13975.291733, 28575.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11229.278000, 25801.040000, 1968.664057, 1968.664057, 0.000000, X, Y)
[Thu Mar  8 09:35:01 2012] Writing fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1.gif
[Thu Mar  8 09:35:16 2012] Mean detx,y = (-15006.58, 3203.31) 
[Thu Mar  8 09:35:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 09:36:38 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 09:36:39 2012] Setting source spectrum file to fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar  8 09:36:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar  8 11:12:33 2012] Updating aperture counts using extracted products
[Thu Mar  8 11:12:33 2012] Error reading totcts from fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar  8 11:12:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 11:12:35 2012] Using photon index=1.80, rate=0.154, arf fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1.arf
[Thu Mar  8 11:12:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 11:12:35 2012] Updating source flux to 1.1e-12
[Thu Mar  8 11:14:25 2012] Reading fit data from xmm0505760401/analysis//spectral/fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar  8 11:14:25 2012] Spectral fit parameter nH value = 7.73711e+20
[Thu Mar  8 11:14:25 2012] Spectral fit parameter PhoIndex value = 2.61584
[Thu Mar  8 11:14:25 2012] Failed to get F(0.3-8.0) from xmm0505760401/analysis//spectral/fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar  8 11:14:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 11:14:25 2012] Using Nh = 7.7e+20, photon index=2.62, rate=0.154, arf fullrun_pn_xmm0505760401_pi300-10000_pass1_cl_src1.arf
[Thu Mar  8 11:14:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 11:14:25 2012] Updating source flux to 8.1e-13