[Thu Mar  8 05:35:40 2012] Detection parameters:
  Position = (331.4, 380.2) = 0 40 39.77 40 25 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.7 +/- 10.3
  Background counts = 9.6
  Rate = 0.003 +/- 0.0006

[Thu Mar  8 05:35:41 2012] Off-axis axis estimate = 6.39'
[Thu Mar  8 07:05:15 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 07:05:15 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Thu Mar  8 07:05:15 2012] source mask rpix=2.2, npix_max = 29, mask sum = 17, frac = 0.578
[Thu Mar  8 07:05:15 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.62"
[Thu Mar  8 07:40:41 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_src8.ximg exists
[Thu Mar  8 07:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_src8.csv
[Thu Mar  8 07:40:41 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Mar  8 07:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_src8.csv
[Thu Mar  8 07:40:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 07:40:41 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Mar  8 07:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Mar  8 07:40:41 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Mar  8 07:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Mar  8 07:40:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505760401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 07:40:57 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.312208 pixels away
[Thu Mar  8 07:40:57 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 07:40:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 07:40:57 2012] Assessing source extent using major
[Thu Mar  8 07:40:57 2012] Source does appear to be extended
[Thu Mar  8 07:40:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 09:06:54 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:06:54 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Thu Mar  8 09:06:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 17, frac = 0.578
[Thu Mar  8 09:06:54 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 9.62"
[Thu Mar  8 09:34:37 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_src8.ximg exists
[Thu Mar  8 09:34:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_src8.csv
[Thu Mar  8 09:34:37 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Mar  8 09:34:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_src8.csv
[Thu Mar  8 09:34:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:34:37 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Mar  8 09:34:37 2012] fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Mar  8 09:34:37 2012] Fit fullrun_mos2_xmm0505760401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Mar  8 09:34:52 2012] Spatial fit model total counts = 128.653000, observed total counts = 128.000000
[Thu Mar  8 09:34:52 2012] Offset between fit and detection position for source 13 = 0.206644 pixels
[Thu Mar  8 09:34:52 2012] 126.277700 total counts/ 87.624900 bgd. counts: snr = 4.129212
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.206644 pixels
  Position = (331.6, 380.3) = 0 40 39.71 40 25 48.3
  Extent = 6.3 (3.4-9.6)", rotation angle = 0
  Source counts = 38.7 +/- 11.2
  Background counts = 87.6
  Rate = 0.001 +/- 0.0004
[Thu Mar  8 09:34:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 09:34:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 09:34:52 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 09:34:52 2012] Source does appear to be extended
[Thu Mar  8 09:34:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 10:51:19 2012] XMMSAS src. selection expression = ellipse(28797.517400, 33041.831800, 379.876811, 379.876811, 0.000000, X, Y)
[Thu Mar  8 10:51:19 2012] Writing source region out to fullrun_mos2_xmm0505760401_pi300-10000_pass1_cl_src13_src.reg
[Thu Mar  8 10:51:19 2012] Extracting stamp from image fullrun_mos2_xmm0505760401_pi300-10000_cl_sm2.00.img.gz, (310, 359) - (353, 402)
[Thu Mar  8 10:51:19 2012] XMMSAS bgd. selection expression = annulus(28797.517400, 33041.831800, 633.128018, 1266.256036, X, Y)
[Thu Mar  8 10:51:19 2012] Writing fullrun_mos2_xmm0505760401_pi300-10000_pass1_cl_src13.gif
[Thu Mar  8 10:55:21 2012] Mean detx,y = (196.26, 5990.45) 
[Thu Mar  8 10:55:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 10:55:56 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 10:55:58 2012] Setting source spectrum file to fullrun_mos2_xmm0505760401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Mar  8 10:55:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505760401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Mar  8 11:08:50 2012] Not generating rmf since there are only 38 counts
[Thu Mar  8 11:08:50 2012] rmf not generated due to insufficient counts
[Thu Mar  8 11:12:40 2012] Updating aperture counts using extracted products
[Thu Mar  8 11:12:40 2012] Error reading totcts from fullrun_mos2_xmm0505760401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Mar  8 11:12:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 11:12:42 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos2_xmm0505760401_pi300-10000_pass1_cl_src13.arf
[Thu Mar  8 11:12:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 11:12:42 2012] Updating source flux to 2.3e-14
[Thu Mar  8 11:13:06 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting