[Mon Feb 20 20:57:47 2012] Detection parameters:
  Position = (302.5, 457.5) = 0 43 19.17 41 7 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 17.3
  Background counts = 133.4
  Rate = 0.001 +/- 0.0003

[Mon Feb 20 20:57:49 2012] Off-axis axis estimate = 11.54'
[Mon Feb 20 21:04:47 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 21:04:47 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Mon Feb 20 21:04:47 2012] source mask rpix=2.8, npix_max = 43, mask sum = 40, frac = 0.916
[Mon Feb 20 21:04:47 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.20"
[Mon Feb 20 22:41:18 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_src10.ximg exists
[Mon Feb 20 22:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_src10.csv
[Mon Feb 20 22:41:18 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Feb 20 22:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_src10.csv
[Mon Feb 20 22:41:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 22:41:19 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Feb 20 22:41:19 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Feb 20 22:41:19 2012] Fit fullrun_pn_xmm0505760201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Feb 21 01:11:20 2012] Source 10 is offset by -1.839975 and -8.129751 pixels which is larger than
2 X fitted extent = 1.392207 x 1.392207, not incorporating fit results
[Tue Feb 21 01:11:20 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.784262 pixels away
[Tue Feb 21 01:11:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 01:11:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 01:11:20 2012] Assessing source extent using major
[Tue Feb 21 01:11:20 2012] Source does appear to be extended
[Tue Feb 21 01:11:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 01:11:46 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:11:46 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Tue Feb 21 01:11:46 2012] source mask rpix=2.8, npix_max = 43, mask sum = 40, frac = 0.916
[Tue Feb 21 01:11:46 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.20"
[Tue Feb 21 02:43:41 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Feb 21 02:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_src10.csv
[Tue Feb 21 02:43:41 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Feb 21 02:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_src10.csv
[Tue Feb 21 02:43:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 02:43:41 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Feb 21 02:43:41 2012] fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Feb 21 02:43:41 2012] Fit fullrun_pn_xmm0505760201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Feb 21 04:55:09 2012] Spatial fit model total counts = 800.435000, observed total counts = 801.000000
[Tue Feb 21 04:55:09 2012] Offset between fit and detection position for source 10 = 7.743861 pixels
[Tue Feb 21 04:55:09 2012] 775.711000 total counts/ 181.218000 bgd. counts: snr = 44.161730
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 7.743861 pixels
  Position = (297.2, 463.1) = 0 43 21.22 41 7 57.7
  Extent = 24.4 (24.3-48.8)", rotation angle = 0
  Source counts = 594.5 +/- 27.9
  Background counts = 181.2
  Rate = 0.01 +/- 0.0007
[Tue Feb 21 04:55:09 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 04:55:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 04:55:09 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 04:55:09 2012] Source does appear to be extended
[Tue Feb 21 04:55:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 04:55:47 2012] XMMSAS src. selection expression = ellipse(25807.446000, 40243.626000, 1463.616042, 1463.616042, 0.000000, X, Y)
[Tue Feb 21 04:55:47 2012] Writing source region out to fullrun_pn_xmm0505760201_pi300-10000_pass1_cl_src10_src.reg
[Tue Feb 21 04:55:47 2012] Extracting stamp from image fullrun_pn_xmm0505760201_pi300-10000_cl_sm2.00.img.gz, (213, 379) - (381, 547)
[Tue Feb 21 04:55:47 2012] XMMSAS bgd. selection expression = annulus(25807.446000, 40243.626000, 2439.360070, 4878.720140, X, Y) && !ellipse(27432.697200, 39372.548400, 487.152814, 487.152814, 0.000000, X, Y) && !ellipse(24085.729584, 40031.309845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26902.221300, 35260.895400, 391.625611, 391.625611, 0.000000, X, Y)
[Tue Feb 21 04:55:47 2012] Writing fullrun_pn_xmm0505760201_pi300-10000_pass1_cl_src10.gif
[Tue Feb 21 05:14:06 2012] Mean detx,y = (5811.67, 13618.22) 
[Tue Feb 21 05:14:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 05:16:01 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 05:16:01 2012] Setting source spectrum file to fullrun_pn_xmm0505760201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Feb 21 05:16:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505760201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Feb 21 09:04:43 2012] Updating aperture counts using extracted products
[Tue Feb 21 09:04:43 2012] Error reading totcts from fullrun_pn_xmm0505760201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Feb 21 09:04:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 09:04:44 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0505760201_pi300-10000_pass1_cl_src10.arf
[Tue Feb 21 09:04:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 09:04:44 2012] Updating source flux to 8.5e-14
[Tue Feb 21 09:07:44 2012] Flag b found in src. 10 procflags, skipping spectral fitting