[Sun Nov 27 01:51:54 2011] Detection parameters:
  Position = (86.4, 287.9) = 0 40 5.04 40 14 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 12.6
  Background counts = 34.5
  Rate = 0.0009 +/- 0.0002

[Sun Nov 27 01:51:54 2011] Off-axis axis estimate = 15.39'
[Sun Nov 27 02:53:46 2011] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 02:53:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 02:53:46 2011] Initial guess for spatial extent in simple fitting = 14.13"
[Sun Nov 27 02:53:46 2011] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.997
[Sun Nov 27 02:53:46 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 14.13"
[Sun Nov 27 03:36:11 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass0_src15.ximg exists
[Sun Nov 27 03:36:11 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Nov 27 03:36:11 2011] Fit fullrun_mos1_xmm0505760101_pi300-10000_cl_pass0_src15 appears to have run properly
[Sun Nov 27 03:36:11 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Nov 27 03:36:11 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Nov 27 03:36:11 2011] Fit fullrun_mos1_xmm0505760101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Nov 27 04:29:21 2011] Spatial fit model total counts = 491.498000, observed total counts = 511.000000
[Sun Nov 27 04:29:21 2011] Offset between fit and detection position for source 12 = 2.834466 pixels
[Sun Nov 27 04:29:21 2011] 519.479000 total counts/ 294.909000 bgd. counts: snr = 13.076988
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.834466 pixels
  Position = (85.7, 285.2) = 0 40 5.29 40 14 45.4
  Extent = 28.3 (28.0-56.5)" x 13.2 (10.8-15.3)", rotation angle = 266 (256-274) degrees
  Source counts = 224.6 +/- 22.8
  Background counts = 294.9
  Rate = 0.004 +/- 0.0004
[Sun Nov 27 04:29:21 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:29:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:29:21 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 04:29:21 2011] Source does appear to be extended
[Sun Nov 27 04:29:21 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.82
[Sun Nov 27 04:29:21 2011] Source is asymmetric
[Sun Nov 27 05:14:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov 27 05:14:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 05:14:31 2011] Initial guess for spatial extent in simple fitting = 20.72"
[Sun Nov 27 05:14:31 2011] source mask rpix=4.8, npix_max = 110, mask sum = 100, frac = 0.902
[Sun Nov 27 05:14:31 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 20.72"
[Sun Nov 27 05:56:18 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Nov 27 05:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_src15.csv
[Sun Nov 27 05:56:18 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Nov 27 05:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_src15.csv
[Sun Nov 27 05:56:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 05:56:19 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Nov 27 05:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Nov 27 05:56:19 2011] fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Nov 27 05:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Nov 27 05:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505760101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 06:46:47 2011] Warning, spatial fit 15 centroid is now closest to src. 6
[Sun Nov 27 06:46:47 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 06:46:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 06:46:47 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 06:46:47 2011] Source does appear to be extended
[Sun Nov 27 06:46:47 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.82
[Sun Nov 27 06:46:47 2011] Source is asymmetric
[Sun Nov 27 07:21:08 2011] XMMSAS src. selection expression = ellipse(7405.818000, 24760.618000, 1695.078049, 791.688023, 265.814000, X, Y)
[Sun Nov 27 07:21:08 2011] Writing source region out to fullrun_mos1_xmm0505760101_pi300-10000_pass1_cl_src12_src.reg
[Sun Nov 27 07:21:08 2011] Extracting stamp from image fullrun_mos1_xmm0505760101_pi300-10000_cl_sm2.00.img.gz, (0, 188) - (183, 383)
[Sun Nov 27 07:21:08 2011] XMMSAS bgd. selection expression = annulus(7405.818000, 24760.618000, 2825.130081, 5650.260163, X, Y) && !ellipse(9876.381172, 25505.963165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9077.468918, 26821.031036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10398.927600, 22705.226600, 777.010422, 777.010422, 0.000000, X, Y)
[Sun Nov 27 07:21:08 2011] Writing fullrun_mos1_xmm0505760101_pi300-10000_pass1_cl_src12.gif
[Sun Nov 27 07:28:44 2011] Mean detx,y = (8889.94, 13899.81) 
[Sun Nov 27 07:28:47 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 07:30:00 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 07:30:00 2011] Setting source spectrum file to fullrun_mos1_xmm0505760101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Nov 27 07:30:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505760101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Nov 27 08:21:21 2011] Updating aperture counts using extracted products
[Sun Nov 27 08:21:21 2011] Error reading totcts from fullrun_mos1_xmm0505760101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Nov 27 08:21:21 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 08:21:21 2011] Using photon index=1.80, rate=0.00384, arf fullrun_mos1_xmm0505760101_pi300-10000_pass1_cl_src12.arf
[Sun Nov 27 08:21:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 08:21:21 2011] Updating source flux to 9.2e-14