[Wed Feb  1 10:09:32 2012] Detection parameters:
  Position = (417.9, 321.7) = 0 42 7.02 41 17 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.7 +/- 13.2
  Background counts = 39.9
  Rate = 0.004 +/- 0.001

[Wed Feb  1 10:09:37 2012] Off-axis axis estimate = 8.83'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Wed Feb  1 10:13:05 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 10.84"
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src91.ximg exists
[Wed Feb  1 16:17:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src91.csv
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src91_1.ximg exists
[Wed Feb  1 16:17:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src91.csv
[Wed Feb  1 16:17:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 16:17:09 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Wed Feb  1 16:17:09 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Wed Feb  1 16:17:09 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Wed Feb  1 23:02:08 2012] Spatial fit model total counts = 1037.250000, observed total counts = 1041.000000
[Wed Feb  1 23:02:08 2012] Offset between fit and detection position for source 92 = 9.232886 pixels
[Wed Feb  1 23:02:08 2012] 934.698000 total counts/ 536.061000 bgd. counts: snr = 17.217516
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 9.232886 pixels
  Position = (424.8, 315.4) = 0 42 4.40 41 16 51.5
  Extent = 21.7 (21.6-43.4)", rotation angle = 0
  Source counts = 398.6 +/- 30.6
  Background counts = 536.1
  Rate = 0.02 +/- 0.002
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:03:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 21.68"
[Wed Feb  1 23:03:03 2012] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.006
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 84 for pass 1, mean size = 21.68"
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src84.ximg exists
[Thu Feb  2 03:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src84.csv
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src84_1.ximg exists
[Thu Feb  2 03:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src84.csv
[Thu Feb  2 03:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Thu Feb  2 03:26:30 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Thu Feb  2 08:44:25 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 10.619301 pixels away
[Thu Feb  2 08:44:26 2012] Warning, spatial fit 84 centroid is now closest to src. 55
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 08:45:16 2012] XMMSAS src. selection expression = ellipse(36904.786000, 27394.152000, 1300.974037, 1300.974037, 0.000000, X, Y)
[Thu Feb  2 08:45:16 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src92_src.reg
[Thu Feb  2 08:45:16 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (350, 241) - (500, 390)
[Thu Feb  2 08:45:17 2012] XMMSAS bgd. selection expression = annulus(36904.786000, 27394.152000, 2168.290062, 4336.580125, X, Y) && !ellipse(34954.796000, 29466.888000, 372.192011, 372.192011, 0.000000, X, Y) && !ellipse(36160.704000, 29050.038000, 329.743209, 329.743209, 0.000000, X, Y) && !ellipse(33068.729600, 26364.228400, 413.728012, 413.728012, 0.000000, X, Y) && !ellipse(32736.871521, 25846.575424, 415.519069, 391.728513, 75.833097, X, Y) && !ellipse(33708.576734, 23983.220200, 462.982413, 429.949612, 126.495531, X, Y) && !ellipse(35898.929321, 32142.731934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32042.929382, 30220.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.905487, 28746.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35769.018000, 28456.438000, 501.980014, 501.980014, 0.000000, X, Y) && !ellipse(39821.861800, 24710.369600, 386.344811, 386.344811, 0.000000, X, Y) && !ellipse(32691.206192, 24088.823546, 371.217196, 268.880573, 59.651963, X, Y) && !ellipse(32794.547400, 23370.196400, 310.344009, 310.344009, 0.000000, X, Y) && !ellipse(34419.371820, 31774.765800, 398.139211, 398.139211, 0.000000, X, Y) && !ellipse(42391.066000, 29793.588000, 1677.504048, 1677.504048, 0.000000, X, Y) && !ellipse(32140.334000, 27773.240000, 1356.736039, 1356.736039, 0.000000, X, Y) && !ellipse(35224.735077, 27335.981934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35593.152000, 25334.902800, 472.409614, 472.409614, 0.000000, X, Y) && !ellipse(31756.570000, 25142.776000, 1400.480040, 1400.480040, 0.000000, X, Y) && !ellipse(32210.660000, 23553.968000, 532.792015, 412.139212, 108.546000, X, Y)
[Thu Feb  2 08:45:17 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src92.gif
[Thu Feb  2 09:52:21 2012] Mean detx,y = (6376.85, -6627.61) 
[Thu Feb  2 09:52:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 09:52:58 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 09:52:58 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Thu Feb  2 09:52:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Thu Feb  2 22:57:25 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:25 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Thu Feb  2 22:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:26 2012] Using photon index=1.80, rate=0.0205, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src92.arf
[Thu Feb  2 22:57:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:26 2012] Updating source flux to 7.1e-14