[Wed Feb  1 10:09:32 2012] Detection parameters:
  Position = (292.3, 324.0) = 0 42 55.52 41 17 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.4 +/- 20.4
  Background counts = 102.9
  Rate = 0.007 +/- 0.001

[Wed Feb  1 10:09:37 2012] Off-axis axis estimate = 1.91'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Feb  1 10:13:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 7.38"
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src90.ximg exists
[Wed Feb  1 16:17:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src90.csv
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src90_1.ximg exists
[Wed Feb  1 16:17:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src90.csv
[Wed Feb  1 16:17:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 16:17:09 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Wed Feb  1 16:17:09 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Wed Feb  1 16:17:09 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Wed Feb  1 23:02:08 2012] Warning, spatial fit 90 centroid is now closest to src. 88
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:02:09 2012] Source is confused with source 86
[Wed Feb  1 23:02:09 2012] Source is confused with source 88
[Wed Feb  1 23:03:03 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Feb  1 23:03:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 7.38"
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src83.ximg exists
[Thu Feb  2 03:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src83.csv
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src83_1.ximg exists
[Thu Feb  2 03:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src83.csv
[Thu Feb  2 03:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Thu Feb  2 03:26:30 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Thu Feb  2 08:44:25 2012] Source 91 is offset by -2.295722 and 3.980689 pixels which is larger than
2 X fitted extent = 6.433793 x 2.376708, not incorporating fit results
[Thu Feb  2 08:44:26 2012] Spatial fit model total counts = 1717.620000, observed total counts = 1712.000000
[Thu Feb  2 08:44:26 2012] Offset between fit and detection position for source 91 = 7.158651 pixels
[Thu Feb  2 08:44:26 2012] 1521.371000 total counts/ 1135.020000 bgd. counts: snr = 11.467805
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 7.158651 pixels
  Position = (287.2, 319.0) = 0 42 57.48 41 17 7.5
  Extent = 14.8 (14.7-29.5)", rotation angle = 0
  Source counts = 386.4 +/- 39.0
  Background counts = 1135.0
  Rate = 0.02 +/- 0.002
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 08:45:16 2012] XMMSAS src. selection expression = ellipse(24937.770000, 27701.976000, 885.912025, 885.912025, 0.000000, X, Y)
[Thu Feb  2 08:45:16 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src91_src.reg
[Thu Feb  2 08:45:16 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (236, 268) - (338, 370)
[Thu Feb  2 08:45:16 2012] XMMSAS bgd. selection expression = annulus(24937.770000, 27701.976000, 1476.520042, 2953.040085, X, Y) && !ellipse(26065.614760, 29819.378000, 446.905613, 446.905613, 0.000000, X, Y) && !ellipse(24358.181000, 30207.280200, 386.116011, 386.116011, 0.000000, X, Y) && !ellipse(23516.829560, 28843.500400, 437.093613, 437.093613, 0.000000, X, Y) && !ellipse(27300.366200, 26830.498400, 520.476815, 520.476815, 0.000000, X, Y) && !ellipse(27917.462600, 26519.454000, 473.342414, 473.342414, 0.000000, X, Y) && !ellipse(25518.560340, 26414.669400, 380.921611, 380.921611, 0.000000, X, Y) && !ellipse(24412.978980, 26458.679400, 407.456812, 407.456812, 0.000000, X, Y) && !ellipse(26071.862400, 25937.949400, 375.338411, 375.338411, 0.000000, X, Y) && !ellipse(28261.246000, 26310.402000, 1154.112033, 1154.112033, 0.000000, X, Y) && !ellipse(23701.850444, 25620.200400, 455.281613, 455.281613, 0.000000, X, Y) && !ellipse(26986.655200, 25589.558200, 460.889613, 460.889613, 0.000000, X, Y) && !ellipse(21996.835334, 24955.937914, 436.368447, 355.913645, 291.633378, X, Y) && !ellipse(25537.002716, 28887.872592, 2267.110942, 1163.766680, 255.127607, X, Y) && !ellipse(27722.285800, 28310.180340, 567.537616, 567.537616, 0.000000, X, Y) && !ellipse(26134.010345, 27261.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.732513, 25713.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.127800, 25649.520000, 714.977621, 714.977621, 0.000000, X, Y) && !ellipse(22739.295197, 31487.446808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27781.487885, 29260.009979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28536.936800, 28192.824000, 1285.352037, 1285.352037, 0.000000, X, Y) && !ellipse(27367.148000, 28823.884000, 1283.896037, 1283.896037, 0.000000, X, Y) && !ellipse(25112.052399, 28673.702515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.362000, 28429.462000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(23429.833801, 26378.788116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25856.362000, 24324.187600, 555.426416, 555.426416, 0.000000, X, Y) && !ellipse(27723.594971, 24228.554230, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:45:16 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src91.gif
[Thu Feb  2 09:51:56 2012] Mean detx,y = (-2928.33, 688.14) 
[Thu Feb  2 09:51:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 09:52:11 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 09:52:11 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Thu Feb  2 09:52:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Thu Feb  2 22:57:25 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:25 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Thu Feb  2 22:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:26 2012] Using photon index=1.80, rate=0.0198, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src91.arf
[Thu Feb  2 22:57:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:26 2012] Updating source flux to 5.7e-14
[Thu Feb  2 23:11:24 2012] Flag b found in src. 91 procflags, skipping spectral fitting
[Thu Feb  2 23:11:24 2012] Flag c found in src. 91 procflags, skipping spectral fitting