[Wed Feb  1 10:09:32 2012] Detection parameters:
  Position = (313.3, 329.9) = 0 42 47.40 41 17 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.3 +/- 21.7
  Background counts = 100.7
  Rate = 0.009 +/- 0.002

[Wed Feb  1 10:09:36 2012] Off-axis axis estimate = 2.53'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Feb  1 10:13:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 84 for pass 0, mean size = 7.69"
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src84.ximg exists
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src84_1.ximg exists
[Wed Feb  1 16:17:07 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src84 appears to have run properly
[Wed Feb  1 16:17:09 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Wed Feb  1 16:17:09 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Wed Feb  1 16:17:09 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Wed Feb  1 23:02:08 2012] Spatial fit model total counts = 1226.090000, observed total counts = 1283.000000
[Wed Feb  1 23:02:08 2012] Offset between fit and detection position for source 85 = 2.593756 pixels
[Wed Feb  1 23:02:08 2012] Warning, changing simple spatial fit ID from 84 to 81
[Wed Feb  1 23:02:08 2012] 1270.550000 total counts/ 885.594000 bgd. counts: snr = 12.935814
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 2.593756 pixels
  Position = (315.1, 331.8) = 0 42 46.71 41 18 3.4
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 385.0 +/- 35.6
  Background counts = 885.6
  Rate = 0.02 +/- 0.002
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:02:09 2012] Source is confused with source 54
[Wed Feb  1 23:03:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 16.05"
[Wed Feb  1 23:03:03 2012] source mask rpix=3.7, npix_max = 70, mask sum = 50, frac = 0.712
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 16.05"
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src79.ximg exists
[Thu Feb  2 03:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src79.csv
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src79_1.ximg exists
[Thu Feb  2 03:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src79.csv
[Thu Feb  2 03:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Thu Feb  2 03:26:30 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Thu Feb  2 08:44:26 2012] Spatial fit model total counts = 1218.460000, observed total counts = 1283.000000
[Thu Feb  2 08:44:26 2012] Offset between fit and detection position for source 85 = 0.056694 pixels
[Thu Feb  2 08:44:26 2012] Warning, changing simple spatial fit ID from 79 to 77
[Thu Feb  2 08:44:26 2012] 1260.795000 total counts/ 875.489000 bgd. counts: snr = 13.022082
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.056694 pixels
  Position = (315.1, 331.9) = 0 42 46.70 41 18 3.6
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 385.3 +/- 35.5
  Background counts = 875.5
  Rate = 0.02 +/- 0.002
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 08:45:16 2012] XMMSAS src. selection expression = ellipse(27367.148000, 28823.884000, 962.922028, 962.922028, 0.000000, X, Y)
[Thu Feb  2 08:45:16 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src85_src.reg
[Thu Feb  2 08:45:16 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (260, 277) - (370, 387)
[Thu Feb  2 08:45:16 2012] XMMSAS bgd. selection expression = annulus(27367.148000, 28823.884000, 1604.870046, 3209.740092, X, Y) && !ellipse(29130.900800, 26328.738000, 424.792012, 424.792012, 0.000000, X, Y) && !ellipse(26065.614760, 29819.378000, 446.905613, 446.905613, 0.000000, X, Y) && !ellipse(24358.181000, 30207.280200, 386.116011, 386.116011, 0.000000, X, Y) && !ellipse(27300.366200, 26830.498400, 520.476815, 520.476815, 0.000000, X, Y) && !ellipse(30886.032000, 26775.636600, 433.808812, 433.808812, 0.000000, X, Y) && !ellipse(27917.462600, 26519.454000, 473.342414, 473.342414, 0.000000, X, Y) && !ellipse(25518.560340, 26414.669400, 380.921611, 380.921611, 0.000000, X, Y) && !ellipse(24412.978980, 26458.679400, 407.456812, 407.456812, 0.000000, X, Y) && !ellipse(26071.862400, 25937.949400, 375.338411, 375.338411, 0.000000, X, Y) && !ellipse(28261.246000, 26310.402000, 1154.112033, 1154.112033, 0.000000, X, Y) && !ellipse(26986.655200, 25589.558200, 460.889613, 460.889613, 0.000000, X, Y) && !ellipse(29983.301025, 31258.423981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30860.146800, 30701.995000, 415.108812, 415.108812, 0.000000, X, Y) && !ellipse(28826.522480, 29639.458400, 387.291211, 387.291211, 0.000000, X, Y) && !ellipse(25537.002716, 28887.872592, 2267.110942, 1163.766680, 255.127607, X, Y) && !ellipse(27722.285800, 28310.180340, 567.537616, 567.537616, 0.000000, X, Y) && !ellipse(28787.138641, 27433.694977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.010345, 27261.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30745.260000, 26227.862000, 1344.688039, 1344.688039, 0.000000, X, Y) && !ellipse(29574.646881, 26718.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.732513, 25713.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.127800, 25649.520000, 714.977621, 714.977621, 0.000000, X, Y) && !ellipse(27781.487885, 29260.009979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28536.936800, 28192.824000, 1285.352037, 1285.352037, 0.000000, X, Y) && !ellipse(25112.052399, 28673.702515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.362000, 28429.462000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(24937.770000, 27701.976000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(23429.833801, 26378.788116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.570000, 25142.776000, 1400.480040, 1400.480040, 0.000000, X, Y)
[Thu Feb  2 08:45:16 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src85.gif
[Thu Feb  2 09:49:47 2012] Mean detx,y = (-1449.97, -1653.27) 
[Thu Feb  2 09:49:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 09:50:15 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 09:50:15 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Thu Feb  2 09:50:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Thu Feb  2 22:57:25 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:25 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Thu Feb  2 22:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:26 2012] Using photon index=1.80, rate=0.0198, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src85.arf
[Thu Feb  2 22:57:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:26 2012] Updating source flux to 6.2e-14
[Thu Feb  2 23:11:24 2012] Flag c found in src. 85 procflags, skipping spectral fitting