[Wed Feb  1 10:09:21 2012] Detection parameters:
  Position = (300.3, 343.2) = 0 42 52.41 41 18 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4447.3 +/- 78.6
  Background counts = 83.5
  Rate = 0.3 +/- 0.006

[Wed Feb  1 10:09:36 2012] Off-axis axis estimate = 3.25'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Wed Feb  1 10:13:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.085
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.05"
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src7.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src7.csv
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src7.csv
[Wed Feb  1 16:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Feb  1 16:17:07 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Feb  1 23:02:08 2012] Spatial fit model total counts = 4803.030000, observed total counts = 4810.000000
[Wed Feb  1 23:02:08 2012] Offset between fit and detection position for source 7 = 0.181996 pixels
[Wed Feb  1 23:02:08 2012] 4797.370000 total counts/ 1430.050000 bgd. counts: snr = 89.044844
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.181996 pixels
  Position = (300.2, 343.3) = 0 42 52.47 41 18 53.4
  Extent = 5.6 (5.4-5.7)", rotation angle = 0
  Source counts = 3367.3 +/- 69.3
  Background counts = 1430.0
  Rate = 0.2 +/- 0.004
[Wed Feb  1 23:02:08 2012] Spatial fit model total counts = 3124.220000, observed total counts = 3121.000000
[Wed Feb  1 23:02:08 2012] Offset between fit and detection position for source 7 = 0.170723 pixels
[Wed Feb  1 23:02:08 2012] Warning, changing simple spatial fit ID from 7 to 51
[Wed Feb  1 23:02:08 2012] 2993.620000 total counts/ 1409.100000 bgd. counts: snr = 42.211114
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.170723 pixels
  Position = (300.2, 343.1) = 0 42 52.48 41 18 52.6
  Extent = 4.9 (4.7-5.2)", rotation angle = 0
  Source counts = 1584.5 +/- 54.7
  Background counts = 1409.1
  Rate = 0.08 +/- 0.003
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:03:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 4.94"
[Wed Feb  1 23:03:03 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.840
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.94"
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src7.ximg exists
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Feb  2 03:26:28 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src7 appears to have run properly
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Feb  2 03:26:29 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Feb  2 08:44:25 2012] Spatial fit model total counts = 4805.490000, observed total counts = 4810.000000
[Thu Feb  2 08:44:25 2012] Offset between fit and detection position for source 7 = 0.171756 pixels
[Thu Feb  2 08:44:25 2012] 4785.890000 total counts/ 1407.830000 bgd. counts: snr = 90.031037
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.171756 pixels
  Position = (300.2, 343.3) = 0 42 52.47 41 18 53.4
  Extent = 5.6 (5.4-5.7)", rotation angle = 0
  Source counts = 3378.1 +/- 69.2
  Background counts = 1407.8
  Rate = 0.2 +/- 0.004
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 08:44:26 2012] Source is confused with source 52
[Thu Feb  2 08:45:13 2012] Counts = 3378.060000, rescaling region sizes by 2.000000
[Thu Feb  2 08:45:13 2012] XMMSAS src. selection expression = ellipse(26065.614760, 29819.378000, 670.358419, 670.358419, 0.000000, X, Y)
[Thu Feb  2 08:45:13 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src7_src.reg
[Thu Feb  2 08:45:13 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (262, 305) - (339, 382)
[Thu Feb  2 08:45:13 2012] XMMSAS bgd. selection expression = annulus(26065.614760, 29819.378000, 2234.528064, 4469.056129, X, Y) && !ellipse(29130.900800, 26328.738000, 424.792012, 424.792012, 0.000000, X, Y) && !ellipse(24358.181000, 30207.280200, 386.116011, 386.116011, 0.000000, X, Y) && !ellipse(23516.829560, 28843.500400, 437.093613, 437.093613, 0.000000, X, Y) && !ellipse(27300.366200, 26830.498400, 520.476815, 520.476815, 0.000000, X, Y) && !ellipse(30886.032000, 26775.636600, 433.808812, 433.808812, 0.000000, X, Y) && !ellipse(27917.462600, 26519.454000, 473.342414, 473.342414, 0.000000, X, Y) && !ellipse(25518.560340, 26414.669400, 380.921611, 380.921611, 0.000000, X, Y) && !ellipse(24412.978980, 26458.679400, 407.456812, 407.456812, 0.000000, X, Y) && !ellipse(26071.862400, 25937.949400, 375.338411, 375.338411, 0.000000, X, Y) && !ellipse(28261.246000, 26310.402000, 1154.112033, 1154.112033, 0.000000, X, Y) && !ellipse(23701.850444, 25620.200400, 455.281613, 455.281613, 0.000000, X, Y) && !ellipse(26986.655200, 25589.558200, 460.889613, 460.889613, 0.000000, X, Y) && !ellipse(21996.835334, 24955.937914, 436.368447, 355.913645, 291.633378, X, Y) && !ellipse(23630.494700, 32766.409200, 483.905614, 483.905614, 0.000000, X, Y) && !ellipse(29983.301025, 31258.423981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30860.146800, 30701.995000, 415.108812, 415.108812, 0.000000, X, Y) && !ellipse(28826.522480, 29639.458400, 387.291211, 387.291211, 0.000000, X, Y) && !ellipse(25537.002716, 28887.872592, 2267.110942, 1163.766680, 255.127607, X, Y) && !ellipse(27722.285800, 28310.180340, 567.537616, 567.537616, 0.000000, X, Y) && !ellipse(28787.138641, 27433.694977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.010345, 27261.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30745.260000, 26227.862000, 1344.688039, 1344.688039, 0.000000, X, Y) && !ellipse(29574.646881, 26718.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.732513, 25713.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.127800, 25649.520000, 714.977621, 714.977621, 0.000000, X, Y) && !ellipse(22739.295197, 31487.446808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27781.487885, 29260.009979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28536.936800, 28192.824000, 1285.352037, 1285.352037, 0.000000, X, Y) && !ellipse(27367.148000, 28823.884000, 1283.896037, 1283.896037, 0.000000, X, Y) && !ellipse(25112.052399, 28673.702515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.362000, 28429.462000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(24937.770000, 27701.976000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(23429.833801, 26378.788116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.570000, 25142.776000, 1400.480040, 1400.480040, 0.000000, X, Y)
[Thu Feb  2 08:45:13 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src7.gif
[Thu Feb  2 08:52:16 2012] Mean detx,y = (-3412.84, -1669.77) 
[Thu Feb  2 08:52:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 08:52:52 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 08:52:52 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Feb  2 08:52:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Feb  2 22:57:24 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:24 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Feb  2 22:57:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:25 2012] Using photon index=1.80, rate=0.173, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src7.arf
[Thu Feb  2 22:57:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:25 2012] Updating source flux to 5.7e-13
[Thu Feb  2 23:11:24 2012] Flag c found in src. 7 procflags, skipping spectral fitting