[Wed Feb  1 10:09:29 2012] Detection parameters:
  Position = (293.7, 334.9) = 0 42 54.96 41 18 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 311.1 +/- 33.5
  Background counts = 93.3
  Rate = 0.02 +/- 0.002

[Wed Feb  1 10:09:36 2012] Off-axis axis estimate = 2.67'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Wed Feb  1 10:13:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.910
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 7.76"
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src51.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src51.csv
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src51.csv
[Wed Feb  1 16:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 16:17:08 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Feb  1 16:17:08 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Feb  1 16:17:08 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Wed Feb  1 23:02:08 2012] Warning, spatial fit 51 centroid is now closest to src. 7
[Wed Feb  1 23:02:08 2012] Warning: source 84 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 12.456474 pixels away
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:02:09 2012] Source is confused with source 86
[Wed Feb  1 23:02:09 2012] Source is confused with source 88
[Wed Feb  1 23:03:03 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Wed Feb  1 23:03:03 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.910
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 7.76"
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src51.ximg exists
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu Feb  2 03:26:28 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src51 appears to have run properly
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu Feb  2 03:26:30 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu Feb  2 03:26:30 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Feb  2 03:26:30 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu Feb  2 03:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:25 2012] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 14.849278 pixels away
[Thu Feb  2 08:44:26 2012] Spatial fit model total counts = 2483.140000, observed total counts = 2477.000000
[Thu Feb  2 08:44:26 2012] Offset between fit and detection position for source 52 = 2.343896 pixels
[Thu Feb  2 08:44:26 2012] Warning, changing simple spatial fit ID from 51 to 81
[Thu Feb  2 08:44:26 2012] 2392.828000 total counts/ 1560.170000 bgd. counts: snr = 21.080490
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 2.343896 pixels
  Position = (294.1, 332.6) = 0 42 54.82 41 18 6.8
  Extent = 28.3" x 14.5", rotation angle = 255
  Source counts = 832.7 +/- 48.9
  Background counts = 1560.2
  Rate = 0.04 +/- 0.003
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.95
[Thu Feb  2 08:44:26 2012] Source is asymmetric
[Thu Feb  2 08:45:16 2012] XMMSAS src. selection expression = ellipse(25537.002716, 28887.872592, 1700.333207, 872.825010, 255.127607, X, Y)
[Thu Feb  2 08:45:16 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src52_src.reg
[Thu Feb  2 08:45:16 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (196, 235) - (392, 430)
[Thu Feb  2 08:45:16 2012] XMMSAS bgd. selection expression = annulus(25537.002716, 28887.872592, 2833.888678, 5667.777355, X, Y) && !ellipse(29130.900800, 26328.738000, 424.792012, 424.792012, 0.000000, X, Y) && !ellipse(26065.614760, 29819.378000, 446.905613, 446.905613, 0.000000, X, Y) && !ellipse(24358.181000, 30207.280200, 386.116011, 386.116011, 0.000000, X, Y) && !ellipse(23516.829560, 28843.500400, 437.093613, 437.093613, 0.000000, X, Y) && !ellipse(27300.366200, 26830.498400, 520.476815, 520.476815, 0.000000, X, Y) && !ellipse(30886.032000, 26775.636600, 433.808812, 433.808812, 0.000000, X, Y) && !ellipse(27917.462600, 26519.454000, 473.342414, 473.342414, 0.000000, X, Y) && !ellipse(25518.560340, 26414.669400, 380.921611, 380.921611, 0.000000, X, Y) && !ellipse(24412.978980, 26458.679400, 407.456812, 407.456812, 0.000000, X, Y) && !ellipse(26071.862400, 25937.949400, 375.338411, 375.338411, 0.000000, X, Y) && !ellipse(28261.246000, 26310.402000, 1154.112033, 1154.112033, 0.000000, X, Y) && !ellipse(23701.850444, 25620.200400, 455.281613, 455.281613, 0.000000, X, Y) && !ellipse(28378.057400, 24837.398400, 369.208011, 369.208011, 0.000000, X, Y) && !ellipse(26986.655200, 25589.558200, 460.889613, 460.889613, 0.000000, X, Y) && !ellipse(21996.835334, 24955.937914, 436.368447, 355.913645, 291.633378, X, Y) && !ellipse(19878.349220, 23668.271000, 492.098414, 492.098414, 0.000000, X, Y) && !ellipse(30672.632453, 23025.588115, 503.235139, 437.896200, 153.324417, X, Y) && !ellipse(23630.494700, 32766.409200, 483.905614, 483.905614, 0.000000, X, Y) && !ellipse(29983.301025, 31258.423981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30860.146800, 30701.995000, 415.108812, 415.108812, 0.000000, X, Y) && !ellipse(32042.929382, 30220.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28826.522480, 29639.458400, 387.291211, 387.291211, 0.000000, X, Y) && !ellipse(27722.285800, 28310.180340, 567.537616, 567.537616, 0.000000, X, Y) && !ellipse(28787.138641, 27433.694977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.010345, 27261.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30745.260000, 26227.862000, 1344.688039, 1344.688039, 0.000000, X, Y) && !ellipse(29574.646881, 26718.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.732513, 25713.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.127800, 25649.520000, 714.977621, 714.977621, 0.000000, X, Y) && !ellipse(29010.026022, 24503.267200, 340.867210, 340.867210, 0.000000, X, Y) && !ellipse(28758.873020, 23288.613200, 546.456816, 415.313612, 322.984500, X, Y) && !ellipse(22739.295197, 31487.446808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27781.487885, 29260.009979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28536.936800, 28192.824000, 1285.352037, 1285.352037, 0.000000, X, Y) && !ellipse(27367.148000, 28823.884000, 1283.896037, 1283.896037, 0.000000, X, Y) && !ellipse(25112.052399, 28673.702515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.362000, 28429.462000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(32140.334000, 27773.240000, 1356.736039, 1356.736039, 0.000000, X, Y) && !ellipse(24937.770000, 27701.976000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(23429.833801, 26378.788116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.010620, 25677.156799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.570000, 25142.776000, 1400.480040, 1400.480040, 0.000000, X, Y) && !ellipse(29530.811194, 24490.779600, 477.529614, 477.529614, 0.000000, X, Y) && !ellipse(25856.362000, 24324.187600, 555.426416, 555.426416, 0.000000, X, Y) && !ellipse(27723.594971, 24228.554230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.131800, 23761.049200, 309.724496, 309.724496, 0.000000, X, Y) && !ellipse(26300.913452, 22820.491302, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:45:16 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src52.gif
[Thu Feb  2 09:33:55 2012] Mean detx,y = (-3277.97, -1082.28) 
[Thu Feb  2 09:33:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 09:34:54 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 09:34:55 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Feb  2 09:34:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Thu Feb  2 22:57:25 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:25 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Feb  2 22:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:26 2012] Using photon index=1.80, rate=0.0427, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src52.arf
[Thu Feb  2 22:57:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:26 2012] Updating source flux to 1.3e-13
[Thu Feb  2 23:11:24 2012] Flag c found in src. 52 procflags, skipping spectral fitting