[Wed Feb  1 10:09:24 2012] Detection parameters:
  Position = (286.1, 235.3) = 0 42 57.89 41 11 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2441.8 +/- 61.0
  Background counts = 67.2
  Rate = 0.2 +/- 0.004

[Wed Feb  1 10:09:36 2012] Off-axis axis estimate = 4.67'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Wed Feb  1 10:13:05 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.76"
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src33.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src33.csv
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src33.csv
[Wed Feb  1 16:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 16:17:08 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Feb  1 16:17:08 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Feb  1 16:17:08 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Feb  1 23:02:08 2012] Spatial fit model total counts = 2820.130000, observed total counts = 2811.000000
[Wed Feb  1 23:02:08 2012] Offset between fit and detection position for source 33 = 0.200229 pixels
[Wed Feb  1 23:02:08 2012] 2828.750000 total counts/ 1115.800000 bgd. counts: snr = 51.280412
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.200229 pixels
  Position = (286.2, 235.5) = 0 42 57.86 41 11 4.2
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 1713.0 +/- 53.2
  Background counts = 1115.8
  Rate = 0.09 +/- 0.003
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:03:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Wed Feb  1 23:03:03 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.933
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 5.63"
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src33.ximg exists
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Feb  2 03:26:28 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src33 appears to have run properly
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Feb  2 03:26:29 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Feb  2 08:44:25 2012] Spatial fit model total counts = 2811.490000, observed total counts = 2811.000000
[Thu Feb  2 08:44:25 2012] Offset between fit and detection position for source 33 = 0.002317 pixels
[Thu Feb  2 08:44:25 2012] 2819.200000 total counts/ 1110.220000 bgd. counts: snr = 51.289971
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.002317 pixels
  Position = (286.2, 235.5) = 0 42 57.86 41 11 4.2
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 1709.0 +/- 53.1
  Background counts = 1110.2
  Rate = 0.09 +/- 0.003
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 08:45:15 2012] Counts = 1708.980000, rescaling region sizes by 2.000000
[Thu Feb  2 08:45:15 2012] XMMSAS src. selection expression = ellipse(24850.668820, 20435.865800, 671.314926, 671.314926, 0.000000, X, Y)
[Thu Feb  2 08:45:15 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src33_src.reg
[Thu Feb  2 08:45:15 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (248, 197) - (325, 274)
[Thu Feb  2 08:45:15 2012] XMMSAS bgd. selection expression = annulus(24850.668820, 20435.865800, 2237.716421, 4475.432843, X, Y) && !ellipse(28378.057400, 24837.398400, 369.208011, 369.208011, 0.000000, X, Y) && !ellipse(21996.835334, 24955.937914, 436.368447, 355.913645, 291.633378, X, Y) && !ellipse(21110.754654, 15961.662521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.732513, 25713.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29010.026022, 24503.267200, 340.867210, 340.867210, 0.000000, X, Y) && !ellipse(28758.873020, 23288.613200, 546.456816, 415.313612, 322.984500, X, Y) && !ellipse(22426.178600, 22522.049200, 392.913611, 392.913611, 0.000000, X, Y) && !ellipse(23666.631200, 19458.129600, 462.228813, 462.228813, 0.000000, X, Y) && !ellipse(29530.811194, 24490.779600, 477.529614, 477.529614, 0.000000, X, Y) && !ellipse(25856.362000, 24324.187600, 555.426416, 555.426416, 0.000000, X, Y) && !ellipse(27723.594971, 24228.554230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.131800, 23761.049200, 309.724496, 309.724496, 0.000000, X, Y) && !ellipse(26300.913452, 22820.491302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27285.567680, 21555.335200, 484.256014, 484.256014, 0.000000, X, Y)
[Thu Feb  2 08:45:15 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src33.gif
[Thu Feb  2 09:18:06 2012] Mean detx,y = (1554.84, 6396.58) 
[Thu Feb  2 09:18:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 09:18:44 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 09:18:45 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Feb  2 09:18:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu Feb  2 22:57:24 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:24 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Feb  2 22:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:26 2012] Using photon index=1.80, rate=0.0877, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src33.arf
[Thu Feb  2 22:57:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:26 2012] Updating source flux to 2.9e-13