[Wed Feb  1 10:09:23 2012] Detection parameters:
  Position = (281.3, 304.9) = 0 42 59.75 41 16 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2321.7 +/- 57.9
  Background counts = 104.0
  Rate = 0.2 +/- 0.004

[Wed Feb  1 10:09:36 2012] Off-axis axis estimate = 1.33'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Wed Feb  1 10:13:05 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.09"
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src18.ximg exists
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Feb  1 16:17:06 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src18 appears to have run properly
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Feb  1 16:17:07 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Feb  1 23:02:08 2012] Spatial fit model total counts = 3426.500000, observed total counts = 3424.000000
[Wed Feb  1 23:02:08 2012] Offset between fit and detection position for source 18 = 0.279234 pixels
[Wed Feb  1 23:02:08 2012] 3374.580000 total counts/ 1764.560000 bgd. counts: snr = 38.327726
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.279234 pixels
  Position = (281.2, 304.7) = 0 42 59.80 41 16 5.4
  Extent = 5.5 (5.2-5.8)" x 4.9 (4.6-5.1)", rotation angle = 299 (282-317) degrees
  Source counts = 1610.0 +/- 58.1
  Background counts = 1764.6
  Rate = 0.08 +/- 0.003
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Wed Feb  1 23:03:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Wed Feb  1 23:03:03 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.048
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 5.18"
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src18.ximg exists
[Thu Feb  2 03:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src18.csv
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Feb  2 03:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src18.csv
[Thu Feb  2 03:26:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Feb  2 03:26:29 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Feb  2 08:44:25 2012] Spatial fit model total counts = 3425.460000, observed total counts = 3424.000000
[Thu Feb  2 08:44:25 2012] Offset between fit and detection position for source 18 = 0.018314 pixels
[Thu Feb  2 08:44:25 2012] 3361.320000 total counts/ 1763.780000 bgd. counts: snr = 38.039039
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.018314 pixels
  Position = (281.2, 304.7) = 0 42 59.80 41 16 5.3
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1597.5 +/- 58.0
  Background counts = 1763.8
  Rate = 0.08 +/- 0.003
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 08:45:14 2012] Counts = 1597.540000, rescaling region sizes by 2.000000
[Thu Feb  2 08:45:14 2012] XMMSAS src. selection expression = ellipse(24412.978980, 26458.679400, 611.185218, 611.185218, 0.000000, X, Y)
[Thu Feb  2 08:45:14 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src18_src.reg
[Thu Feb  2 08:45:14 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (246, 270) - (316, 340)
[Thu Feb  2 08:45:14 2012] XMMSAS bgd. selection expression = annulus(24412.978980, 26458.679400, 2037.284059, 4074.568117, X, Y) && !ellipse(26065.614760, 29819.378000, 446.905613, 446.905613, 0.000000, X, Y) && !ellipse(24358.181000, 30207.280200, 386.116011, 386.116011, 0.000000, X, Y) && !ellipse(23516.829560, 28843.500400, 437.093613, 437.093613, 0.000000, X, Y) && !ellipse(27300.366200, 26830.498400, 520.476815, 520.476815, 0.000000, X, Y) && !ellipse(27917.462600, 26519.454000, 473.342414, 473.342414, 0.000000, X, Y) && !ellipse(25518.560340, 26414.669400, 380.921611, 380.921611, 0.000000, X, Y) && !ellipse(26071.862400, 25937.949400, 375.338411, 375.338411, 0.000000, X, Y) && !ellipse(28261.246000, 26310.402000, 1154.112033, 1154.112033, 0.000000, X, Y) && !ellipse(23701.850444, 25620.200400, 455.281613, 455.281613, 0.000000, X, Y) && !ellipse(28378.057400, 24837.398400, 369.208011, 369.208011, 0.000000, X, Y) && !ellipse(26986.655200, 25589.558200, 460.889613, 460.889613, 0.000000, X, Y) && !ellipse(21996.835334, 24955.937914, 436.368447, 355.913645, 291.633378, X, Y) && !ellipse(19878.349220, 23668.271000, 492.098414, 492.098414, 0.000000, X, Y) && !ellipse(28826.522480, 29639.458400, 387.291211, 387.291211, 0.000000, X, Y) && !ellipse(25537.002716, 28887.872592, 2267.110942, 1163.766680, 255.127607, X, Y) && !ellipse(27722.285800, 28310.180340, 567.537616, 567.537616, 0.000000, X, Y) && !ellipse(28787.138641, 27433.694977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.010345, 27261.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.732513, 25713.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.127800, 25649.520000, 714.977621, 714.977621, 0.000000, X, Y) && !ellipse(28758.873020, 23288.613200, 546.456816, 415.313612, 322.984500, X, Y) && !ellipse(22426.178600, 22522.049200, 392.913611, 392.913611, 0.000000, X, Y) && !ellipse(27781.487885, 29260.009979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28536.936800, 28192.824000, 1285.352037, 1285.352037, 0.000000, X, Y) && !ellipse(27367.148000, 28823.884000, 1283.896037, 1283.896037, 0.000000, X, Y) && !ellipse(25112.052399, 28673.702515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.362000, 28429.462000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(24937.770000, 27701.976000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(23429.833801, 26378.788116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25856.362000, 24324.187600, 555.426416, 555.426416, 0.000000, X, Y) && !ellipse(27723.594971, 24228.554230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.131800, 23761.049200, 309.724496, 309.724496, 0.000000, X, Y) && !ellipse(26300.913452, 22820.491302, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:45:14 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src18.gif
[Thu Feb  2 09:00:34 2012] Mean detx,y = (-2596.82, 1994.43) 
[Thu Feb  2 09:00:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 09:01:04 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 09:01:04 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Feb  2 09:01:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Feb  2 22:57:24 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:24 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Feb  2 22:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:26 2012] Using photon index=1.80, rate=0.082, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src18.arf
[Thu Feb  2 22:57:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:26 2012] Updating source flux to 3.1e-13