[Wed Feb  1 10:09:21 2012] Detection parameters:
  Position = (270.9, 332.1) = 0 43 3.75 41 18 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2021.1 +/- 55.7
  Background counts = 85.7
  Rate = 0.1 +/- 0.004

[Wed Feb  1 10:09:36 2012] Off-axis axis estimate = 3.15'
[Wed Feb  1 10:13:05 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 10:13:05 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Wed Feb  1 10:13:05 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Wed Feb  1 10:13:05 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.00"
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src11.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src11.csv
[Wed Feb  1 16:17:06 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Feb  1 16:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src11.csv
[Wed Feb  1 16:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Feb  1 16:17:07 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Feb  1 16:17:07 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Feb  1 23:02:08 2012] Spatial fit model total counts = 2689.330000, observed total counts = 2688.000000
[Wed Feb  1 23:02:08 2012] Offset between fit and detection position for source 11 = 0.081674 pixels
[Wed Feb  1 23:02:08 2012] 2708.790000 total counts/ 1355.970000 bgd. counts: snr = 36.737955
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.081674 pixels
  Position = (270.9, 332.1) = 0 43 3.78 41 18 4.6
  Extent = 5.4 (5.2-5.7)", rotation angle = 0
  Source counts = 1352.8 +/- 52.0
  Background counts = 1356.0
  Rate = 0.07 +/- 0.003
[Wed Feb  1 23:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:08 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:08 2012] Source does appear to be extended
[Wed Feb  1 23:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:03:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb  1 23:03:03 2012] Initial guess for spatial extent in simple fitting = 5.44"
[Wed Feb  1 23:03:03 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.305
[Wed Feb  1 23:03:03 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.44"
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src11.ximg exists
[Thu Feb  2 03:26:28 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Feb  2 03:26:28 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Feb  2 03:26:29 2012] fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Feb  2 03:26:29 2012] Fit fullrun_pn_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Feb  2 08:44:25 2012] Spatial fit model total counts = 2688.000000, observed total counts = 2688.000000
[Thu Feb  2 08:44:25 2012] Offset between fit and detection position for source 11 = 0.001360 pixels
[Thu Feb  2 08:44:25 2012] 2707.770000 total counts/ 1352.280000 bgd. counts: snr = 36.860651
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.001360 pixels
  Position = (270.9, 332.1) = 0 43 3.78 41 18 4.6
  Extent = 5.5 (5.2-5.7)", rotation angle = 0
  Source counts = 1355.5 +/- 52.0
  Background counts = 1352.3
  Rate = 0.07 +/- 0.003
[Thu Feb  2 08:44:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:26 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:26 2012] Source does appear to be extended
[Thu Feb  2 08:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 08:45:13 2012] Counts = 1355.490000, rescaling region sizes by 2.000000
[Thu Feb  2 08:45:13 2012] XMMSAS src. selection expression = ellipse(23516.829560, 28843.500400, 655.640419, 655.640419, 0.000000, X, Y)
[Thu Feb  2 08:45:13 2012] Writing source region out to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src11_src.reg
[Thu Feb  2 08:45:13 2012] Extracting stamp from image fullrun_pn_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (233, 294) - (309, 370)
[Thu Feb  2 08:45:13 2012] XMMSAS bgd. selection expression = annulus(23516.829560, 28843.500400, 2185.468065, 4370.936129, X, Y) && !ellipse(26065.614760, 29819.378000, 446.905613, 446.905613, 0.000000, X, Y) && !ellipse(24358.181000, 30207.280200, 386.116011, 386.116011, 0.000000, X, Y) && !ellipse(27300.366200, 26830.498400, 520.476815, 520.476815, 0.000000, X, Y) && !ellipse(27917.462600, 26519.454000, 473.342414, 473.342414, 0.000000, X, Y) && !ellipse(25518.560340, 26414.669400, 380.921611, 380.921611, 0.000000, X, Y) && !ellipse(24412.978980, 26458.679400, 407.456812, 407.456812, 0.000000, X, Y) && !ellipse(26071.862400, 25937.949400, 375.338411, 375.338411, 0.000000, X, Y) && !ellipse(28261.246000, 26310.402000, 1154.112033, 1154.112033, 0.000000, X, Y) && !ellipse(23701.850444, 25620.200400, 455.281613, 455.281613, 0.000000, X, Y) && !ellipse(26986.655200, 25589.558200, 460.889613, 460.889613, 0.000000, X, Y) && !ellipse(21996.835334, 24955.937914, 436.368447, 355.913645, 291.633378, X, Y) && !ellipse(23630.494700, 32766.409200, 483.905614, 483.905614, 0.000000, X, Y) && !ellipse(25537.002716, 28887.872592, 2267.110942, 1163.766680, 255.127607, X, Y) && !ellipse(27722.285800, 28310.180340, 567.537616, 567.537616, 0.000000, X, Y) && !ellipse(26134.010345, 27261.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.732513, 25713.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.127800, 25649.520000, 714.977621, 714.977621, 0.000000, X, Y) && !ellipse(22739.295197, 31487.446808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27781.487885, 29260.009979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28536.936800, 28192.824000, 1285.352037, 1285.352037, 0.000000, X, Y) && !ellipse(27367.148000, 28823.884000, 1283.896037, 1283.896037, 0.000000, X, Y) && !ellipse(25112.052399, 28673.702515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.362000, 28429.462000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(24937.770000, 27701.976000, 1181.216034, 1181.216034, 0.000000, X, Y) && !ellipse(23429.833801, 26378.788116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25856.362000, 24324.187600, 555.426416, 555.426416, 0.000000, X, Y) && !ellipse(27723.594971, 24228.554230, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:45:13 2012] Writing fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src11.gif
[Thu Feb  2 08:54:23 2012] Mean detx,y = (-4754.74, 700.95) 
[Thu Feb  2 08:54:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 08:55:06 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 08:55:06 2012] Setting source spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb  2 08:55:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Feb  2 22:57:24 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:24 2012] Error reading totcts from fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb  2 22:57:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:25 2012] Using photon index=1.80, rate=0.0696, arf fullrun_pn_xmm0505720601_pi300-10000_pass1_cl_src11.arf
[Thu Feb  2 22:57:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:25 2012] Updating source flux to 2.3e-13