[Wed Feb  1 10:09:52 2012] Detection parameters:
  Position = (476.4, 237.2) = 0 41 44.54 41 11 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 912.4 +/- 36.5
  Background counts = 9.0
  Rate = 0.04 +/- 0.002

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 13.65'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Wed Feb  1 19:35:10 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 13.25"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src25.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src25.csv
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src25.csv
[Wed Feb  1 23:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Feb  1 23:01:46 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Feb  1 23:02:41 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.334506 pixels away
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 05:34:49 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb  2 05:34:49 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Thu Feb  2 05:34:49 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Thu Feb  2 05:34:49 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 13.25"
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src25.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src25.csv
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src25.csv
[Thu Feb  2 08:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Feb  2 08:44:04 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Feb  2 08:44:52 2012] Spatial fit model total counts = 894.998000, observed total counts = 895.000000
[Thu Feb  2 08:44:52 2012] Offset between fit and detection position for source 6 = 0.272539 pixels
[Thu Feb  2 08:44:52 2012] 893.944000 total counts/ 286.796000 bgd. counts: snr = 35.851557
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.272539 pixels
  Position = (476.2, 237.3) = 0 41 44.63 41 11 11.2
  Extent = 5.8 (5.4-6.2)", rotation angle = 0
  Source counts = 607.1 +/- 29.9
  Background counts = 286.8
  Rate = 0.03 +/- 0.001
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:23 2012] XMMSAS src. selection expression = ellipse(41384.057600, 20600.501600, 346.955410, 346.955410, 0.000000, X, Y)
[Thu Feb  2 19:10:23 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src6_src.reg
[Thu Feb  2 19:10:23 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (456, 217) - (496, 257)
[Thu Feb  2 19:10:23 2012] XMMSAS bgd. selection expression = annulus(41384.057600, 20600.501600, 578.259017, 1156.518033, X, Y)
[Thu Feb  2 19:10:23 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src6.gif
[Thu Feb  2 19:28:49 2012] Mean detx,y = (-14123.17, 4124.85) 
[Thu Feb  2 19:28:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:28:56 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:28:56 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb  2 19:28:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Feb  2 22:57:29 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:29 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.0281, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src6.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 8.9e-13