[Wed Feb  1 10:09:58 2012] Detection parameters:
  Position = (300.6, 314.8) = 0 42 52.29 41 16 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.3 +/- 20.7
  Background counts = 39.4
  Rate = 0.01 +/- 0.001

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 1.20'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Wed Feb  1 19:35:10 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 7.03"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src59.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src59.csv
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src59.csv
[Wed Feb  1 23:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:01:47 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Feb  1 23:01:47 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Feb  1 23:01:47 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Wed Feb  1 23:02:41 2012] Spatial fit model total counts = 1264.840000, observed total counts = 1266.000000
[Wed Feb  1 23:02:41 2012] Offset between fit and detection position for source 59 = 0.384309 pixels
[Wed Feb  1 23:02:41 2012] 1233.425600 total counts/ 1172.930000 bgd. counts: snr = 1.766395
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.384309 pixels
  Position = (300.3, 315.1) = 0 42 52.41 41 16 50.5
  Extent = 3.3 (2.5-4.3)", rotation angle = 0
  Source counts = 60.5 +/- 35.1
  Background counts = 1172.9
  Rate = 0.003 +/- 0.002
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:02:41 2012] Source is confused with source 83
[Thu Feb  2 05:34:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:49 2012] Initial guess for spatial extent in simple fitting = 3.33"
[Thu Feb  2 05:34:49 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.935
[Thu Feb  2 05:34:49 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 3.33"
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src59.ximg exists
[Thu Feb  2 08:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src59.csv
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu Feb  2 08:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src59.csv
[Thu Feb  2 08:44:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu Feb  2 08:44:04 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu Feb  2 08:44:52 2012] Spatial fit model total counts = 1181.000000, observed total counts = 1181.000000
[Thu Feb  2 08:44:52 2012] Offset between fit and detection position for source 59 = 0.031870 pixels
[Thu Feb  2 08:44:52 2012] 1156.006800 total counts/ 1093.880000 bgd. counts: snr = 1.878426
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.031870 pixels
  Position = (300.3, 315.0) = 0 42 52.40 41 16 50.4
  Extent = 3.4 (2.5-4.5)", rotation angle = 0
  Source counts = 62.1 +/- 34.0
  Background counts = 1093.9
  Rate = 0.003 +/- 0.002
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:24 2012] XMMSAS src. selection expression = ellipse(26081.260800, 27359.770400, 205.269006, 205.269006, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src59_src.reg
[Thu Feb  2 19:10:24 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (289, 303) - (312, 327)
[Thu Feb  2 19:10:24 2012] XMMSAS bgd. selection expression = annulus(26081.260800, 27359.770400, 342.115010, 684.230020, X, Y) && !ellipse(27287.423848, 26855.866672, 573.964716, 421.651259, 50.856764, X, Y) && !ellipse(25516.100920, 26410.393800, 389.798411, 328.713609, 43.610600, X, Y) && !ellipse(26070.977295, 25953.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.950000, 25899.718000, 1108.584032, 1108.584032, 0.000000, X, Y) && !ellipse(25501.539886, 27426.648529, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src59.gif
[Thu Feb  2 19:37:13 2012] Mean detx,y = (1979.16, -411.18) 
[Thu Feb  2 19:37:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:37:22 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:37:22 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Feb  2 19:37:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Thu Feb  2 22:27:18 2012] Not generating rmf since there are only 62 counts
[Thu Feb  2 22:27:18 2012] rmf not generated due to insufficient counts
[Thu Feb  2 22:57:29 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:29 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src59.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 4.1e-14
[Thu Feb  2 23:04:49 2012] Flag c found in src. 59 procflags, skipping spectral fitting
[Thu Feb  2 23:04:49 2012] Source 59 has fewer than 100.000000 counts, skipping spectral fitting