[Wed Feb  1 10:09:57 2012] Detection parameters:
  Position = (196.6, 230.0) = 0 43 32.37 41 10 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.8 +/- 24.2
  Background counts = 10.0
  Rate = 0.02 +/- 0.001

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 8.90'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Wed Feb  1 19:35:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 1.000
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.88"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src42.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src42.csv
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src42.csv
[Wed Feb  1 23:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:01:47 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed Feb  1 23:01:47 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed Feb  1 23:01:47 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Wed Feb  1 23:02:41 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 13.727345 pixels away
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 05:34:49 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:49 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Thu Feb  2 05:34:49 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 1.000
[Thu Feb  2 05:34:49 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 10.88"
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src42.ximg exists
[Thu Feb  2 08:44:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src42.csv
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src42_1.ximg exists
[Thu Feb  2 08:44:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src42.csv
[Thu Feb  2 08:44:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Thu Feb  2 08:44:04 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Thu Feb  2 08:44:52 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 15.155325 pixels away
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:24 2012] XMMSAS src. selection expression = ellipse(17056.624481, 19958.807800, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src46_src.reg
[Thu Feb  2 19:10:24 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (159, 192) - (234, 267)
[Thu Feb  2 19:10:24 2012] XMMSAS bgd. selection expression = annulus(17056.624481, 19958.807800, 1087.500000, 2175.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src46.gif
[Thu Feb  2 19:32:55 2012] Mean detx,y = (4227.64, -11848.37) 
[Thu Feb  2 19:32:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:33:04 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:33:05 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Feb  2 19:33:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu Feb  2 21:44:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 21:44:26 2012] rmf not generated due to insufficient counts
[Thu Feb  2 22:57:29 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:29 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.0183, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src46.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 3.7e-13
[Thu Feb  2 23:04:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting