[Wed Feb  1 10:09:55 2012] Detection parameters:
  Position = (328.8, 295.2) = 0 42 41.43 41 15 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 433.6 +/- 29.4
  Background counts = 44.2
  Rate = 0.02 +/- 0.001

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 2.21'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Wed Feb  1 19:35:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.54"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src39.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src39.csv
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src39.csv
[Wed Feb  1 23:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:01:47 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Feb  1 23:01:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Feb  1 23:01:47 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Feb  1 23:01:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Feb  1 23:01:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:02:40 2012] Source 42 is offset by 1.077310 and -4.135263 pixels which is larger than
2 X fitted extent = 1.713306 x 1.713306, not incorporating fit results
[Wed Feb  1 23:02:41 2012] Source 42 is offset by -3.871288 and -5.495424 pixels which is larger than
2 X fitted extent = 1.259632 x 1.259632, not incorporating fit results
[Wed Feb  1 23:02:41 2012] Source 42 is offset by -6.451702 and 5.432507 pixels which is larger than
2 X fitted extent = 1.049375 x 1.049375, not incorporating fit results
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb  1 23:02:41 2012] Source is confused with source 62
[Thu Feb  2 05:34:49 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:49 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu Feb  2 05:34:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Thu Feb  2 05:34:49 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 7.54"
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src39.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src39.csv
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src39.csv
[Thu Feb  2 08:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Feb  2 08:44:04 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Feb  2 08:44:52 2012] Source 42 is offset by -1.813954 and -5.217608 pixels which is larger than
2 X fitted extent = 1.200097 x 1.200097, not incorporating fit results
[Thu Feb  2 08:44:52 2012] Source 42 is offset by -5.017931 and -6.374435 pixels which is larger than
2 X fitted extent = 3.503168 x 3.503168, not incorporating fit results
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:24 2012] XMMSAS src. selection expression = ellipse(28555.951965, 25630.006134, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src42_src.reg
[Thu Feb  2 19:10:24 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (291, 258) - (366, 333)
[Thu Feb  2 19:10:24 2012] XMMSAS bgd. selection expression = annulus(28555.951965, 25630.006134, 1087.500000, 2175.000000, X, Y) && !ellipse(29199.632940, 26418.795000, 444.948013, 406.890412, 50.748559, X, Y) && !ellipse(27287.423848, 26855.866672, 573.964716, 421.651259, 50.856764, X, Y) && !ellipse(26994.117400, 25593.289600, 586.523217, 383.056011, 118.015000, X, Y) && !ellipse(27926.565600, 26642.270000, 1097.552032, 572.979216, 279.610000, X, Y) && !ellipse(30879.910600, 26779.816200, 392.776011, 392.776011, 0.000000, X, Y) && !ellipse(30654.467400, 23028.641600, 428.777612, 428.777612, 0.000000, X, Y) && !ellipse(26070.977295, 25953.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.730621, 26911.466644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.950000, 25899.718000, 1108.584032, 1108.584032, 0.000000, X, Y) && !ellipse(28377.348400, 24837.782800, 375.163211, 375.163211, 0.000000, X, Y) && !ellipse(28998.786000, 24518.433600, 323.888009, 323.888009, 0.000000, X, Y) && !ellipse(30014.288000, 26962.980000, 1309.040038, 1309.040038, 0.000000, X, Y) && !ellipse(28086.832184, 25416.483368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27644.147800, 28293.960400, 625.323218, 625.323218, 0.000000, X, Y) && !ellipse(28737.761600, 23293.129200, 337.909610, 337.909610, 0.000000, X, Y) && !ellipse(27613.129822, 24642.632599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29553.380096, 24511.869751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29795.314331, 27542.144958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29291.096000, 28214.286000, 1180.104034, 1180.104034, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src42.gif
[Thu Feb  2 19:32:09 2012] Mean detx,y = (-981.75, -22.52) 
[Thu Feb  2 19:32:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:32:20 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:32:20 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu Feb  2 19:32:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Thu Feb  2 21:40:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 21:40:05 2012] rmf not generated due to insufficient counts
[Thu Feb  2 22:57:29 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:29 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.0211, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src42.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 2.1e-13
[Thu Feb  2 23:04:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting