[Wed Feb  1 10:09:53 2012] Detection parameters:
  Position = (184.4, 286.1) = 0 43 37.12 41 14 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 734.9 +/- 32.1
  Background counts = 10.7
  Rate = 0.03 +/- 0.001

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 8.32'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Wed Feb  1 19:35:10 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.59"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src30.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src30.csv
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src30.csv
[Wed Feb  1 23:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Feb  1 23:01:46 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Feb  1 23:02:41 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 14.146954 pixels away
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 05:34:49 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:49 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Thu Feb  2 05:34:49 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Thu Feb  2 05:34:49 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 10.59"
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src30.ximg exists
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Feb  2 08:44:02 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src30 appears to have run properly
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Feb  2 08:44:04 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Feb  2 08:44:52 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 14.146954 pixels away
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:24 2012] XMMSAS src. selection expression = ellipse(15995.279175, 24841.688110, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src22_src.reg
[Thu Feb  2 19:10:24 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (147, 249) - (222, 324)
[Thu Feb  2 19:10:24 2012] XMMSAS bgd. selection expression = annulus(15995.279175, 24841.688110, 1087.500000, 2175.000000, X, Y) && !ellipse(16642.836838, 23198.392242, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src22.gif
[Thu Feb  2 19:29:49 2012] Mean detx,y = (8145.54, -8773.44) 
[Thu Feb  2 19:29:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:30:08 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:30:09 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Feb  2 19:30:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Feb  2 21:12:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 21:12:57 2012] rmf not generated due to insufficient counts
[Thu Feb  2 22:57:29 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:29 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.034, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src22.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 6.9e-13
[Thu Feb  2 23:04:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting