[Wed Feb  1 10:09:52 2012] Detection parameters:
  Position = (361.4, 145.9) = 0 42 28.91 41 4 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 758.5 +/- 33.1
  Background counts = 8.9
  Rate = 0.04 +/- 0.002

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 11.97'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Wed Feb  1 19:35:10 2012] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.934
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 12.41"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src29.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src29.csv
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Feb  1 23:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src29.csv
[Wed Feb  1 23:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Feb  1 23:01:46 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Feb  1 23:02:41 2012] Warning, spatial fit 29 centroid is now closest to src. 97
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 05:34:49 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:49 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Thu Feb  2 05:34:49 2012] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.934
[Thu Feb  2 05:34:49 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 12.41"
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src29.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src29.csv
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src29.csv
[Thu Feb  2 08:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Feb  2 08:44:04 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Feb  2 08:44:04 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Feb  2 08:44:52 2012] Spatial fit model total counts = 803.001000, observed total counts = 803.000000
[Thu Feb  2 08:44:52 2012] Offset between fit and detection position for source 12 = 0.160619 pixels
[Thu Feb  2 08:44:52 2012] 803.646000 total counts/ 280.361000 bgd. counts: snr = 31.252120
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.160619 pixels
  Position = (361.3, 145.9) = 0 42 28.97 41 4 34.6
  Extent = 6.0 (5.5-6.4)", rotation angle = 0
  Source counts = 523.3 +/- 28.3
  Background counts = 280.4
  Rate = 0.02 +/- 0.001
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:24 2012] XMMSAS src. selection expression = ellipse(31380.833000, 12645.707200, 358.218010, 358.218010, 0.000000, X, Y)
[Thu Feb  2 19:10:24 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src12_src.reg
[Thu Feb  2 19:10:24 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (341, 125) - (382, 166)
[Thu Feb  2 19:10:24 2012] XMMSAS bgd. selection expression = annulus(31380.833000, 12645.707200, 597.030017, 1194.060034, X, Y)
[Thu Feb  2 19:10:24 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src12.gif
[Thu Feb  2 19:29:38 2012] Mean detx,y = (-11470.96, -8377.92) 
[Thu Feb  2 19:29:39 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:29:46 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:29:46 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Feb  2 19:29:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Feb  2 22:57:29 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:29 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.0242, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src12.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 7e-13