[Wed Feb  1 10:09:52 2012] Detection parameters:
  Position = (300.3, 343.3) = 0 42 52.41 41 18 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1907.6 +/- 53.0
  Background counts = 27.5
  Rate = 0.1 +/- 0.003

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 3.26'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Wed Feb  1 19:35:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.130
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.06"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src7.ximg exists
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Feb  1 23:01:45 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src7 appears to have run properly
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Feb  1 23:01:46 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Feb  1 23:02:40 2012] Spatial fit model total counts = 2193.180000, observed total counts = 2179.000000
[Wed Feb  1 23:02:40 2012] Offset between fit and detection position for source 11 = 0.278000 pixels
[Wed Feb  1 23:02:40 2012] 2141.673000 total counts/ 870.093000 bgd. counts: snr = 43.108295
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.278000 pixels
  Position = (300.1, 343.5) = 0 42 52.48 41 18 54.3
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 1271.6 +/- 46.3
  Background counts = 870.1
  Rate = 0.06 +/- 0.002
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 05:34:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:48 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Thu Feb  2 05:34:48 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.854
[Thu Feb  2 05:34:48 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.89"
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src7.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src7.csv
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src7.csv
[Thu Feb  2 08:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Feb  2 08:44:03 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Feb  2 08:44:52 2012] Spatial fit model total counts = 2183.770000, observed total counts = 2179.000000
[Thu Feb  2 08:44:52 2012] Offset between fit and detection position for source 11 = 0.001389 pixels
[Thu Feb  2 08:44:52 2012] 2135.080000 total counts/ 872.870000 bgd. counts: snr = 42.722517
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.001389 pixels
  Position = (300.1, 343.5) = 0 42 52.48 41 18 54.3
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 1262.2 +/- 46.2
  Background counts = 872.9
  Rate = 0.06 +/- 0.002
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:23 2012] Counts = 1262.210000, rescaling region sizes by 2.000000
[Thu Feb  2 19:10:23 2012] XMMSAS src. selection expression = ellipse(26063.997660, 29837.818800, 586.755617, 586.755617, 0.000000, X, Y)
[Thu Feb  2 19:10:23 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src11_src.reg
[Thu Feb  2 19:10:23 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (266, 310) - (334, 377)
[Thu Feb  2 19:10:23 2012] XMMSAS bgd. selection expression = annulus(26063.997660, 29837.818800, 1955.852056, 3911.704113, X, Y) && !ellipse(29199.632940, 26418.795000, 444.948013, 406.890412, 50.748559, X, Y) && !ellipse(27287.423848, 26855.866672, 573.964716, 421.651259, 50.856764, X, Y) && !ellipse(26994.117400, 25593.289600, 586.523217, 383.056011, 118.015000, X, Y) && !ellipse(27926.565600, 26642.270000, 1097.552032, 572.979216, 279.610000, X, Y) && !ellipse(25516.100920, 26410.393800, 389.798411, 328.713609, 43.610600, X, Y) && !ellipse(26070.977295, 25953.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23704.845300, 25620.485200, 428.932812, 428.932812, 0.000000, X, Y) && !ellipse(28046.730621, 26911.466644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.840920, 26456.792400, 388.668011, 335.653610, 69.710500, X, Y) && !ellipse(24459.221800, 30337.444400, 362.214410, 362.214410, 0.000000, X, Y) && !ellipse(23507.993000, 28843.122400, 353.441610, 353.441610, 0.000000, X, Y) && !ellipse(27463.950000, 25899.718000, 1108.584032, 1108.584032, 0.000000, X, Y) && !ellipse(26810.093000, 29061.462600, 309.025609, 309.025609, 0.000000, X, Y) && !ellipse(28832.292680, 29638.886400, 381.658411, 381.658411, 0.000000, X, Y) && !ellipse(28555.951965, 25630.006134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23613.771692, 32781.585800, 780.948822, 509.155215, 335.021212, X, Y) && !ellipse(29975.566925, 31263.569427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30014.288000, 26962.980000, 1309.040038, 1309.040038, 0.000000, X, Y) && !ellipse(25448.532227, 29464.887970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.832184, 25416.483368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27644.147800, 28293.960400, 625.323218, 625.323218, 0.000000, X, Y) && !ellipse(26081.260800, 27359.770400, 273.692008, 273.692008, 0.000000, X, Y) && !ellipse(25088.282000, 25237.346000, 1106.312032, 1106.312032, 0.000000, X, Y) && !ellipse(23429.873627, 26327.697388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22698.973267, 31540.964233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29795.314331, 27542.144958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.539886, 27426.648529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29291.096000, 28214.286000, 1180.104034, 1180.104034, 0.000000, X, Y)
[Thu Feb  2 19:10:23 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src11.gif
[Thu Feb  2 19:17:48 2012] Mean detx,y = (3571.28, 1472.66) 
[Thu Feb  2 19:17:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:18:17 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:18:17 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb  2 19:18:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Feb  2 22:57:29 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:29 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.0584, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src11.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 7.5e-13