[Wed Feb  1 10:09:52 2012] Detection parameters:
  Position = (253.2, 287.8) = 0 43 10.58 41 14 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2502.5 +/- 60.5
  Background counts = 23.2
  Rate = 0.1 +/- 0.003

[Wed Feb  1 10:10:02 2012] Off-axis axis estimate = 3.37'
[Wed Feb  1 19:35:10 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 19:35:10 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Wed Feb  1 19:35:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.117
[Wed Feb  1 19:35:10 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.11"
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src2.ximg exists
[Wed Feb  1 23:01:45 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Feb  1 23:01:45 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Feb  1 23:01:46 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Feb  1 23:01:46 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Feb  1 23:02:40 2012] Spatial fit model total counts = 2284.980000, observed total counts = 2375.000000
[Wed Feb  1 23:02:40 2012] Offset between fit and detection position for source 1 = 0.182143 pixels
[Wed Feb  1 23:02:40 2012] 2306.199000 total counts/ 669.589000 bgd. counts: snr = 63.247162
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.182143 pixels
  Position = (253.2, 287.6) = 0 43 10.59 41 14 51.0
  Extent = 5.6" x 4.5", rotation angle = 74
  Source counts = 1636.6 +/- 48.0
  Background counts = 669.6
  Rate = 0.08 +/- 0.002
[Wed Feb  1 23:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:41 2012] Assessing source extent using major
[Wed Feb  1 23:02:41 2012] Source does appear to be extended
[Wed Feb  1 23:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.23
[Thu Feb  2 05:34:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 05:34:48 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Thu Feb  2 05:34:48 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.814
[Thu Feb  2 05:34:48 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.06"
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src2.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src2.csv
[Thu Feb  2 08:44:02 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Feb  2 08:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src2.csv
[Thu Feb  2 08:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Feb  2 08:44:03 2012] fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Feb  2 08:44:03 2012] Fit fullrun_mos2_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Feb  2 08:44:52 2012] Spatial fit model total counts = 2375.000000, observed total counts = 2375.000000
[Thu Feb  2 08:44:52 2012] Offset between fit and detection position for source 1 = 0.018615 pixels
[Thu Feb  2 08:44:52 2012] 2395.710000 total counts/ 688.880000 bgd. counts: snr = 65.030708
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018615 pixels
  Position = (253.2, 287.6) = 0 43 10.59 41 14 51.1
  Extent = 5.0 (4.8-5.3)", rotation angle = 0
  Source counts = 1706.8 +/- 48.9
  Background counts = 688.9
  Rate = 0.08 +/- 0.002
[Thu Feb  2 08:44:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:52 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:52 2012] Source does appear to be extended
[Thu Feb  2 08:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 19:10:22 2012] Counts = 1706.830000, rescaling region sizes by 2.000000
[Thu Feb  2 19:10:22 2012] XMMSAS src. selection expression = ellipse(21979.801980, 24974.863000, 604.272017, 604.272017, 0.000000, X, Y)
[Thu Feb  2 19:10:22 2012] Writing source region out to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb  2 19:10:22 2012] Extracting stamp from image fullrun_mos2_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (218, 253) - (288, 322)
[Thu Feb  2 19:10:22 2012] XMMSAS bgd. selection expression = annulus(21979.801980, 24974.863000, 2014.240058, 4028.480116, X, Y) && !ellipse(25516.100920, 26410.393800, 389.798411, 328.713609, 43.610600, X, Y) && !ellipse(19894.322838, 23649.648608, 559.439745, 417.468381, 62.963860, X, Y) && !ellipse(26070.977295, 25953.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23704.845300, 25620.485200, 428.932812, 428.932812, 0.000000, X, Y) && !ellipse(24812.971313, 20552.206848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.840920, 26456.792400, 388.668011, 335.653610, 69.710500, X, Y) && !ellipse(23507.993000, 28843.122400, 353.441610, 353.441610, 0.000000, X, Y) && !ellipse(19614.873170, 28565.601600, 334.410410, 334.410410, 0.000000, X, Y) && !ellipse(25448.532227, 29464.887970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22420.597000, 22541.061800, 330.950410, 330.950410, 0.000000, X, Y) && !ellipse(26081.260800, 27359.770400, 273.692008, 273.692008, 0.000000, X, Y) && !ellipse(25088.282000, 25237.346000, 1106.312032, 1106.312032, 0.000000, X, Y) && !ellipse(18059.876419, 29339.217468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.873627, 26327.697388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26599.918000, 21978.506000, 1333.656038, 1333.656038, 0.000000, X, Y) && !ellipse(25501.539886, 27426.648529, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 19:10:22 2012] Writing fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src1.gif
[Thu Feb  2 19:10:51 2012] Mean detx,y = (3621.73, -4852.90) 
[Thu Feb  2 19:10:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 19:11:50 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 19:11:50 2012] Setting source spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb  2 19:11:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb  2 22:57:28 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:28 2012] Error reading totcts from fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb  2 22:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:30 2012] Using photon index=1.80, rate=0.079, arf fullrun_mos2_xmm0505720601_pi300-10000_pass1_cl_src1.arf
[Thu Feb  2 22:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:30 2012] Updating source flux to 1e-12