[Wed Feb  1 10:09:48 2012] Detection parameters:
  Position = (396.3, 366.1) = 0 42 15.35 41 20 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.5 +/- 12.0
  Background counts = 12.7
  Rate = 0.006 +/- 0.0009

[Wed Feb  1 10:09:51 2012] Off-axis axis estimate = 8.62'
[Wed Feb  1 16:17:09 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 16:17:09 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Wed Feb  1 16:17:09 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.936
[Wed Feb  1 16:17:09 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 10.74"
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src63.ximg exists
[Wed Feb  1 19:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src63.csv
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed Feb  1 19:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src63.csv
[Wed Feb  1 19:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 19:35:09 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed Feb  1 19:35:09 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Feb  1 19:35:09 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Wed Feb  1 23:02:24 2012] Warning, spatial fit 63 centroid is now closest to src. 30
[Wed Feb  1 23:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:24 2012] Assessing source extent using major
[Wed Feb  1 23:02:24 2012] Source does appear to be extended
[Wed Feb  1 23:02:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 03:26:31 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Feb  2 03:26:31 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Feb  2 03:26:31 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.936
[Thu Feb  2 03:26:31 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 10.74"
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src62.ximg exists
[Thu Feb  2 05:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src62.csv
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu Feb  2 05:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src62.csv
[Thu Feb  2 05:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu Feb  2 05:34:48 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Thu Feb  2 08:44:38 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 14.777926 pixels away
[Thu Feb  2 08:44:38 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:38 2012] Assessing source extent using major
[Thu Feb  2 08:44:38 2012] Source does appear to be extended
[Thu Feb  2 08:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 16:22:35 2012] XMMSAS src. selection expression = ellipse(34425.786316, 31803.865234, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 16:22:35 2012] Writing source region out to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src61_src.reg
[Thu Feb  2 16:22:35 2012] Extracting stamp from image fullrun_mos1_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (359, 329) - (434, 404)
[Thu Feb  2 16:22:35 2012] XMMSAS bgd. selection expression = annulus(34425.786316, 31803.865234, 1087.500000, 2175.000000, X, Y) && !ellipse(34960.748169, 29664.657684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32024.880800, 30241.321400, 380.773611, 380.773611, 0.000000, X, Y) && !ellipse(35877.479340, 32124.616669, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 16:22:35 2012] Writing fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src61.gif
[Thu Feb  2 16:38:12 2012] Mean detx,y = (8535.41, 1504.44) 
[Thu Feb  2 16:38:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 16:38:33 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 16:38:33 2012] Setting source spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Feb  2 16:38:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Thu Feb  2 19:09:48 2012] Not generating rmf since there are only 82 counts
[Thu Feb  2 19:09:48 2012] rmf not generated due to insufficient counts
[Thu Feb  2 22:57:27 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:27 2012] Error reading totcts from fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Feb  2 22:57:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:28 2012] Using photon index=1.80, rate=0.00609, arf fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src61.arf
[Thu Feb  2 22:57:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:28 2012] Updating source flux to 9.1e-14
[Thu Feb  2 22:57:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting