[Wed Feb  1 10:09:40 2012] Detection parameters:
  Position = (314.3, 309.0) = 0 42 47.01 41 16 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2810.9 +/- 65.1
  Background counts = 43.4
  Rate = 0.1 +/- 0.003

[Wed Feb  1 10:09:51 2012] Off-axis axis estimate = 1.38'
[Wed Feb  1 16:17:09 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 16:17:09 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Wed Feb  1 16:17:09 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.876
[Wed Feb  1 16:17:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.12"
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src3.csv
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src3.csv
[Wed Feb  1 19:35:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Feb  1 19:35:08 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Feb  1 23:02:24 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Wed Feb  1 23:02:24 2012] Spatial fit model total counts = 8055.850000, observed total counts = 8059.000000
[Wed Feb  1 23:02:24 2012] Offset between fit and detection position for source 6 = 0.223757 pixels
[Wed Feb  1 23:02:24 2012] Warning, changing simple spatial fit ID from 3 to 4
[Wed Feb  1 23:02:24 2012] 8143.730000 total counts/ 7071.500000 bgd. counts: snr = 12.750646
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.223757 pixels
  Position = (314.3, 308.8) = 0 42 47.02 41 16 23.1
  Extent = 7.1 (6.8-7.6)" x 3.5 (3.2-3.8)", rotation angle = 77 (72-81) degrees
  Source counts = 1072.2 +/- 90.2
  Background counts = 7071.5
  Rate = 0.05 +/- 0.004
[Wed Feb  1 23:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:24 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:24 2012] Source does appear to be extended
[Wed Feb  1 23:02:24 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.78
[Wed Feb  1 23:02:24 2012] Source is asymmetric
[Thu Feb  2 03:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 03:26:31 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Thu Feb  2 03:26:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.759
[Thu Feb  2 03:26:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.31"
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src3.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src3.csv
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src3.csv
[Thu Feb  2 05:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Feb  2 05:34:47 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Feb  2 08:44:38 2012] Spatial fit model total counts = 5961.780000, observed total counts = 5914.000000
[Thu Feb  2 08:44:38 2012] Offset between fit and detection position for source 6 = 0.354280 pixels
[Thu Feb  2 08:44:38 2012] 5974.740000 total counts/ 4681.000000 bgd. counts: snr = 18.909397
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.354280 pixels
  Position = (314.1, 309.1) = 0 42 47.08 41 16 24.5
  Extent = 5.9 (5.7-6.1)", rotation angle = 0
  Source counts = 1293.7 +/- 77.3
  Background counts = 4681.0
  Rate = 0.06 +/- 0.004
[Thu Feb  2 08:44:38 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:38 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:38 2012] Source does appear to be extended
[Thu Feb  2 08:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 16:22:34 2012] Counts = 1293.740000, rescaling region sizes by 2.000000
[Thu Feb  2 16:22:34 2012] XMMSAS src. selection expression = ellipse(27281.780000, 26842.543400, 704.227220, 704.227220, 0.000000, X, Y)
[Thu Feb  2 16:22:34 2012] Writing source region out to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src6_src.reg
[Thu Feb  2 16:22:34 2012] Extracting stamp from image fullrun_mos1_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (274, 269) - (355, 350)
[Thu Feb  2 16:22:34 2012] XMMSAS bgd. selection expression = annulus(27281.780000, 26842.543400, 2347.424068, 4694.848135, X, Y) && !ellipse(29202.675740, 26416.702400, 399.712812, 399.712812, 0.000000, X, Y) && !ellipse(27914.250200, 26498.453600, 363.196010, 363.196010, 0.000000, X, Y) && !ellipse(26983.781201, 25591.731910, 516.900887, 390.568114, 312.511061, X, Y) && !ellipse(25522.025920, 26414.354600, 376.564011, 376.564011, 0.000000, X, Y) && !ellipse(26058.567420, 29812.845200, 352.591210, 352.591210, 0.000000, X, Y) && !ellipse(30878.307000, 26776.831000, 434.338412, 434.338412, 0.000000, X, Y) && !ellipse(30664.155270, 23025.654600, 431.800812, 431.800812, 0.000000, X, Y) && !ellipse(31528.570420, 21992.418600, 411.316012, 411.316012, 0.000000, X, Y) && !ellipse(26065.590120, 25941.273000, 305.459209, 305.459209, 0.000000, X, Y) && !ellipse(23691.971260, 25620.157000, 412.994412, 412.994412, 0.000000, X, Y) && !ellipse(28281.926000, 26080.630000, 536.525615, 536.525615, 0.000000, X, Y) && !ellipse(24404.217240, 26459.519800, 323.264809, 323.264809, 0.000000, X, Y) && !ellipse(24458.511200, 30326.601800, 422.434412, 422.434412, 0.000000, X, Y) && !ellipse(23516.228040, 28842.995200, 414.609612, 414.609612, 0.000000, X, Y) && !ellipse(26813.459400, 29056.034600, 375.185611, 375.185611, 0.000000, X, Y) && !ellipse(28348.346000, 24829.746800, 291.492808, 291.492808, 0.000000, X, Y) && !ellipse(30861.528511, 30723.681147, 405.425422, 339.791875, 65.852412, X, Y) && !ellipse(32024.880800, 30241.321400, 380.773611, 380.773611, 0.000000, X, Y) && !ellipse(28861.421051, 29634.257599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28970.687000, 24518.284600, 326.392809, 326.392809, 0.000000, X, Y) && !ellipse(27786.981140, 25622.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30247.362274, 26741.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.217740, 31252.236000, 386.708811, 386.708811, 0.000000, X, Y) && !ellipse(25432.923309, 29463.356018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28733.752400, 23283.210861, 407.224012, 296.514409, 337.995000, X, Y) && !ellipse(27694.511000, 28293.788600, 562.829616, 562.829616, 0.000000, X, Y) && !ellipse(26110.932831, 27279.928955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22403.468506, 22527.907074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24771.321869, 25718.235413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.104401, 27528.251190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23412.015900, 26317.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.865601, 23525.438751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.708496, 28499.147614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.586853, 21503.461365, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 16:22:34 2012] Writing fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src6.gif
[Thu Feb  2 16:23:27 2012] Mean detx,y = (174.77, -752.08) 
[Thu Feb  2 16:23:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 16:23:43 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 16:23:43 2012] Setting source spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb  2 16:23:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Feb  2 22:57:27 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:27 2012] Error reading totcts from fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb  2 22:57:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:27 2012] Using photon index=1.80, rate=0.0599, arf fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src6.arf
[Thu Feb  2 22:57:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:27 2012] Updating source flux to 5.9e-13