[Wed Feb  1 10:09:43 2012] Detection parameters:
  Position = (292.9, 339.2) = 0 42 55.28 41 18 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.1 +/- 21.8
  Background counts = 28.7
  Rate = 0.01 +/- 0.001

[Wed Feb  1 10:09:51 2012] Off-axis axis estimate = 2.98'
[Wed Feb  1 16:17:09 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 16:17:09 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Wed Feb  1 16:17:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Wed Feb  1 16:17:09 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 7.92"
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src47.ximg exists
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed Feb  1 19:35:07 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src47 appears to have run properly
[Wed Feb  1 19:35:09 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed Feb  1 19:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed Feb  1 19:35:09 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed Feb  1 19:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed Feb  1 19:35:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 23:02:24 2012] Warning, spatial fit 47 centroid is now closest to src. 67
[Wed Feb  1 23:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:24 2012] Assessing source extent using major
[Wed Feb  1 23:02:24 2012] Source does appear to be extended
[Wed Feb  1 23:02:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 03:26:31 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu Feb  2 03:26:31 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu Feb  2 03:26:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Thu Feb  2 03:26:31 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 7.92"
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src47.ximg exists
[Thu Feb  2 05:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src47.csv
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src47_1.ximg exists
[Thu Feb  2 05:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src47.csv
[Thu Feb  2 05:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Thu Feb  2 05:34:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src47.csv
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Thu Feb  2 05:34:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src47.csv
[Thu Feb  2 05:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 08:44:38 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 10.601744 pixels away
[Thu Feb  2 08:44:38 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:38 2012] Assessing source extent using major
[Thu Feb  2 08:44:38 2012] Source does appear to be extended
[Thu Feb  2 08:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 16:22:35 2012] XMMSAS src. selection expression = ellipse(25432.923309, 29463.356018, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 16:22:35 2012] Writing source region out to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src36_src.reg
[Thu Feb  2 16:22:35 2012] Extracting stamp from image fullrun_mos1_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (255, 302) - (330, 377)
[Thu Feb  2 16:22:35 2012] XMMSAS bgd. selection expression = annulus(25432.923309, 29463.356018, 1087.500000, 2175.000000, X, Y) && !ellipse(27281.780000, 26842.543400, 469.484814, 469.484814, 0.000000, X, Y) && !ellipse(26058.567420, 29812.845200, 352.591210, 352.591210, 0.000000, X, Y) && !ellipse(24458.511200, 30326.601800, 422.434412, 422.434412, 0.000000, X, Y) && !ellipse(23516.228040, 28842.995200, 414.609612, 414.609612, 0.000000, X, Y) && !ellipse(26813.459400, 29056.034600, 375.185611, 375.185611, 0.000000, X, Y) && !ellipse(27694.511000, 28293.788600, 562.829616, 562.829616, 0.000000, X, Y) && !ellipse(26110.932831, 27279.928955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.104401, 27528.251190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.708496, 28499.147614, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 16:22:35 2012] Writing fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src36.gif
[Thu Feb  2 16:34:29 2012] Mean detx,y = (1197.98, -3895.11) 
[Thu Feb  2 16:34:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 16:34:39 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 16:34:39 2012] Setting source spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Feb  2 16:34:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Feb  2 18:50:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 18:50:29 2012] rmf not generated due to insufficient counts
[Thu Feb  2 22:57:27 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:27 2012] Error reading totcts from fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Feb  2 22:57:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:28 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src36.arf
[Thu Feb  2 22:57:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:28 2012] Updating source flux to 1.7e-13
[Thu Feb  2 22:57:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting