[Wed Feb  1 10:09:42 2012] Detection parameters:
  Position = (416.4, 334.8) = 0 42 7.58 41 18 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 710.3 +/- 32.6
  Background counts = 13.0
  Rate = 0.05 +/- 0.002

[Wed Feb  1 10:09:51 2012] Off-axis axis estimate = 8.95'
[Wed Feb  1 16:17:09 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 16:17:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb  1 16:17:09 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Wed Feb  1 16:17:09 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Wed Feb  1 16:17:09 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.90"
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src18.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src18.csv
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src18.csv
[Wed Feb  1 19:35:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Feb  1 19:35:08 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Feb  1 23:02:24 2012] Spatial fit model total counts = 990.539000, observed total counts = 987.000000
[Wed Feb  1 23:02:24 2012] Offset between fit and detection position for source 24 = 0.172630 pixels
[Wed Feb  1 23:02:24 2012] 960.824000 total counts/ 470.195000 bgd. counts: snr = 22.626335
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.172630 pixels
  Position = (416.3, 334.7) = 0 42 7.64 41 18 15.5
  Extent = 6.1 (5.7-6.4)", rotation angle = 0
  Source counts = 490.6 +/- 31.0
  Background counts = 470.2
  Rate = 0.02 +/- 0.001
[Wed Feb  1 23:02:24 2012] Spatial fit model total counts = 1012.410000, observed total counts = 1014.000000
[Wed Feb  1 23:02:24 2012] Offset between fit and detection position for source 24 = 0.129431 pixels
[Wed Feb  1 23:02:24 2012] Warning, changing simple spatial fit ID from 18 to 44
[Wed Feb  1 23:02:24 2012] 1055.370000 total counts/ 726.084000 bgd. counts: snr = 12.220243
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.129431 pixels
  Position = (416.2, 334.6) = 0 42 7.66 41 18 15.0
  Extent = 5.0 (4.2-5.9)" x 3.9 (3.3-4.5)", rotation angle = 54 (27-77) degrees
  Source counts = 329.3 +/- 32.5
  Background counts = 726.1
  Rate = 0.02 +/- 0.002
[Wed Feb  1 23:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:24 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:24 2012] Source does appear to be extended
[Wed Feb  1 23:02:24 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Wed Feb  1 23:02:24 2012] Source is confused with source 40
[Thu Feb  2 03:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 03:26:31 2012] Initial guess for spatial extent in simple fitting = 4.43"
[Thu Feb  2 03:26:31 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.976
[Thu Feb  2 03:26:31 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 4.43"
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src18.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src18.csv
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src18.csv
[Thu Feb  2 05:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Feb  2 05:34:48 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Feb  2 08:44:38 2012] Spatial fit model total counts = 1033.890000, observed total counts = 1030.000000
[Thu Feb  2 08:44:38 2012] Offset between fit and detection position for source 24 = 0.123535 pixels
[Thu Feb  2 08:44:38 2012] 1004.801000 total counts/ 513.366000 bgd. counts: snr = 21.689649
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.123535 pixels
  Position = (416.3, 334.7) = 0 42 7.64 41 18 15.5
  Extent = 6.0 (5.6-6.7)", rotation angle = 0
  Source counts = 491.4 +/- 31.7
  Background counts = 513.4
  Rate = 0.02 +/- 0.001
[Thu Feb  2 08:44:38 2012] Spatial fit model total counts = 1016.030000, observed total counts = 1014.000000
[Thu Feb  2 08:44:38 2012] Offset between fit and detection position for source 24 = 0.121778 pixels
[Thu Feb  2 08:44:38 2012] Warning, changing simple spatial fit ID from 18 to 44
[Thu Feb  2 08:44:38 2012] 1059.918000 total counts/ 733.311000 bgd. counts: snr = 12.060946
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.121778 pixels
  Position = (416.2, 334.6) = 0 42 7.66 41 18 15.0
  Extent = 4.9 (4.2-5.9)" x 3.8 (3.3-4.5)", rotation angle = 54 (27-78) degrees
  Source counts = 326.6 +/- 32.6
  Background counts = 733.3
  Rate = 0.02 +/- 0.002
[Thu Feb  2 08:44:38 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:38 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:38 2012] Source does appear to be extended
[Thu Feb  2 08:44:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Thu Feb  2 16:22:35 2012] XMMSAS src. selection expression = ellipse(36164.878000, 29063.130000, 296.373009, 230.943607, 54.341000, X, Y)
[Thu Feb  2 16:22:35 2012] Writing source region out to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src24_src.reg
[Thu Feb  2 16:22:35 2012] Extracting stamp from image fullrun_mos1_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (399, 318) - (433, 352)
[Thu Feb  2 16:22:35 2012] XMMSAS bgd. selection expression = annulus(36164.878000, 29063.130000, 493.955014, 987.910028, X, Y) && !ellipse(34960.748169, 29664.657684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35793.171539, 28535.218842, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 16:22:35 2012] Writing fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src24.gif
[Thu Feb  2 16:28:03 2012] Mean detx,y = (7517.56, 4574.98) 
[Thu Feb  2 16:28:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 16:28:10 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 16:28:10 2012] Setting source spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Feb  2 16:28:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Feb  2 22:57:27 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:27 2012] Error reading totcts from fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Feb  2 22:57:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:28 2012] Using photon index=1.80, rate=0.0151, arf fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src24.arf
[Thu Feb  2 22:57:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:28 2012] Updating source flux to 2.9e-13
[Thu Feb  2 22:57:32 2012] Flag c found in src. 24 procflags, skipping spectral fitting