[Wed Feb  1 10:09:42 2012] Detection parameters:
  Position = (353.0, 265.1) = 0 42 32.08 41 13 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1629.6 +/- 49.4
  Background counts = 31.1
  Rate = 0.08 +/- 0.003

[Wed Feb  1 10:09:51 2012] Off-axis axis estimate = 4.64'
[Wed Feb  1 16:17:09 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 16:17:09 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Wed Feb  1 16:17:09 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Wed Feb  1 16:17:09 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.75"
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src9.ximg exists
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Feb  1 19:35:07 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src9 appears to have run properly
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Feb  1 19:35:08 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Feb  1 23:02:24 2012] Spatial fit model total counts = 1758.100000, observed total counts = 1752.000000
[Wed Feb  1 23:02:24 2012] Offset between fit and detection position for source 20 = 0.097858 pixels
[Wed Feb  1 23:02:24 2012] 1767.943000 total counts/ 634.463000 bgd. counts: snr = 44.999813
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.097858 pixels
  Position = (353.0, 265.2) = 0 42 32.10 41 13 13.6
  Extent = 5.4 (5.1-5.7)", rotation angle = 0
  Source counts = 1133.5 +/- 42.0
  Background counts = 634.5
  Rate = 0.05 +/- 0.002
[Wed Feb  1 23:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:24 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:24 2012] Source does appear to be extended
[Wed Feb  1 23:02:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 03:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 03:26:31 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Thu Feb  2 03:26:31 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.321
[Thu Feb  2 03:26:31 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.39"
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src9.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src9.csv
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src9.csv
[Thu Feb  2 05:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Feb  2 05:34:47 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Feb  2 08:44:38 2012] Spatial fit model total counts = 1757.470000, observed total counts = 1752.000000
[Thu Feb  2 08:44:38 2012] Offset between fit and detection position for source 20 = 0.000069 pixels
[Thu Feb  2 08:44:38 2012] 1767.348000 total counts/ 634.228000 bgd. counts: snr = 44.993854
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.000069 pixels
  Position = (353.0, 265.2) = 0 42 32.10 41 13 13.6
  Extent = 5.4 (5.1-5.7)", rotation angle = 0
  Source counts = 1133.1 +/- 42.0
  Background counts = 634.2
  Rate = 0.05 +/- 0.002
[Thu Feb  2 08:44:38 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:38 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:38 2012] Source does appear to be extended
[Thu Feb  2 08:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 16:22:34 2012] Counts = 1133.120000, rescaling region sizes by 2.000000
[Thu Feb  2 16:22:34 2012] XMMSAS src. selection expression = ellipse(30664.155270, 23025.654600, 647.701219, 647.701219, 0.000000, X, Y)
[Thu Feb  2 16:22:34 2012] Writing source region out to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src20_src.reg
[Thu Feb  2 16:22:34 2012] Extracting stamp from image fullrun_mos1_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (316, 228) - (390, 302)
[Thu Feb  2 16:22:34 2012] XMMSAS bgd. selection expression = annulus(30664.155270, 23025.654600, 2159.004062, 4318.008124, X, Y) && !ellipse(29202.675740, 26416.702400, 399.712812, 399.712812, 0.000000, X, Y) && !ellipse(27281.780000, 26842.543400, 469.484814, 469.484814, 0.000000, X, Y) && !ellipse(27914.250200, 26498.453600, 363.196010, 363.196010, 0.000000, X, Y) && !ellipse(26983.781201, 25591.731910, 516.900887, 390.568114, 312.511061, X, Y) && !ellipse(30878.307000, 26776.831000, 434.338412, 434.338412, 0.000000, X, Y) && !ellipse(31528.570420, 21992.418600, 411.316012, 411.316012, 0.000000, X, Y) && !ellipse(26065.590120, 25941.273000, 305.459209, 305.459209, 0.000000, X, Y) && !ellipse(32756.217240, 25850.519800, 323.264809, 323.264809, 0.000000, X, Y) && !ellipse(33704.720184, 23974.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33791.620500, 22048.055000, 470.978414, 470.978414, 0.000000, X, Y) && !ellipse(28281.926000, 26080.630000, 536.525615, 536.525615, 0.000000, X, Y) && !ellipse(33065.471000, 26366.859400, 316.865609, 316.865609, 0.000000, X, Y) && !ellipse(31550.827980, 19146.180000, 554.010416, 452.162413, 332.075000, X, Y) && !ellipse(28348.346000, 24829.746800, 291.492808, 291.492808, 0.000000, X, Y) && !ellipse(27790.888000, 21102.976000, 295.492009, 295.492009, 0.000000, X, Y) && !ellipse(28970.687000, 24518.284600, 326.392809, 326.392809, 0.000000, X, Y) && !ellipse(27786.981140, 25622.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30247.362274, 26741.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32687.302000, 24086.870000, 278.903208, 278.903208, 0.000000, X, Y) && !ellipse(32856.184900, 23415.363800, 269.593608, 269.593608, 0.000000, X, Y) && !ellipse(28733.752400, 23283.210861, 407.224012, 296.514409, 337.995000, X, Y) && !ellipse(35255.146564, 20081.448711, 532.005261, 425.092276, 90.000000, X, Y) && !ellipse(26110.932831, 27279.928955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34524.319763, 22323.833557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.104401, 27528.251190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.865601, 23525.438751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.586853, 21503.461365, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 16:22:34 2012] Writing fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src20.gif
[Thu Feb  2 16:25:22 2012] Mean detx,y = (-635.52, 4132.30) 
[Thu Feb  2 16:25:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 16:26:05 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 16:26:06 2012] Setting source spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Feb  2 16:26:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Feb  2 22:57:27 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:27 2012] Error reading totcts from fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Feb  2 22:57:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:28 2012] Using photon index=1.80, rate=0.0524, arf fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src20.arf
[Thu Feb  2 22:57:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:28 2012] Updating source flux to 5.8e-13